Piston clearance question
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 97
Likes: 0
From: san leandro, ca, united states
Piston clearance question
Can someone answer this question, very simple I assume.
US gsr block with JDM ITR pistons, head milled .015, and Blox Tuner B's.
Clearance issues anticipated?
Any help is appreciated.
Gracias
US gsr block with JDM ITR pistons, head milled .015, and Blox Tuner B's.
Clearance issues anticipated?
Any help is appreciated.
Gracias
Honda-Tech Member
Joined: Jul 2002
Posts: 1,445
Likes: 1
From: Mrs. Sauga, Ontario, Canada
Re: Piston clearance question
My experience:
USDM GSR block decked ~0.005"
USDM GSR Head decked ~0.002"
RS Machine ITR Pistons (USDM copy)
OEM Head Gasket
Skunk2 Pro 1's
P2V wasn't an issue... plenty of clearance.
P2D was tight... just over 0.040".
If I had to do over I would have gone with PR3's for a bit more P2D clearance.
USDM GSR block decked ~0.005"
USDM GSR Head decked ~0.002"
RS Machine ITR Pistons (USDM copy)
OEM Head Gasket
Skunk2 Pro 1's
P2V wasn't an issue... plenty of clearance.
P2D was tight... just over 0.040".
If I had to do over I would have gone with PR3's for a bit more P2D clearance.
Thread
Thread Starter
Forum
Replies
Last Post
