1994 integra GSR... Clean!!!
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 53
Likes: 0
From: Palm Coast, FL, USA
1994 integra GSR... Clean!!!
1994 acura integra gsr. It is new formula red (honda s2000 red). Car has 2000 integra front end and rear bumpers and headlights. Carbon fiber sunroof plug. ITR front lip. Almost every widow molding had been replaced(almost $1000 in moldings and the rear windows,body isn't far from show room except the fallowing). the lip has a crack, a few nicks on hood an bumper from rocks. The photos don't do it justice. Memory fab seats with rails,g force five point harnesses(I have all the stock belts as well), auto power roll bar with removable cross bar, mint carpet, ITR door panels, a dash out of an 00 or 01(don't remember what year it was but its very new),, jdm itr non srs steering wheel(mint), jdm ITR cluster. It has a b20 block with an integra ls head (the integra cams are a more aggressive cam then the b20). Light head work and .20 of an inch milled from the head. JDM integra type R trans with the 4.7 final drive(LSD).Cold A/C. Fluidyne radiator w/ real FAL fans, tanabe hyper madalion full exhaust that is a 2.5" all the way through ( were the cat would normal bolt up on the off the shelf exhaust is only a 2.25, so I had it cut and a test pipe made to make it a 2.5 all the way through)., DC sports JDM ITR header w/2.5'' collector, test pipe. koni yellow adjustable shocks with neuspeed race springs, ITR rear lower control arms, Energy Suspension Hyper-Flex System (including trailing arms bushings), skunk 2 front upper control arms, 23mm JDM ITR anti roll bar with beaks reinforcement kit, 11" front brakes(same as itr, but it still has 4x100 lug bolt pattern), abs has been removed, a 99 si per portioning valve with a 60x40 slip please email me with any questions or offers or come see the car. Very very clean. Please call with offer, or come check it out. Its worth seeing!!! 6500 obo
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 53
Likes: 0
From: Palm Coast, FL, USA
Re: 1994 integra GSR... Clean!!!
bump, I have a b16 head head work, ITR intake valves, ITR outer intake valve springs and portflow inners, and portflow titanuim retainer that will go with the car, and a hondata s200 with a p72 ecu.
