IFO Tulsa - I finally get my 10's!
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 343
Likes: 0
From: Oklahoma City, Ok, 73170
After a long build and about 3 years later, I finally reach my goal of hitting 10's in a full interior street car.
http://www.youtube.com/watch?v=EZqxj-rDvRk
My current setup is the following:
Fully built GSR 84mm
Full Race Top Mount Twin gate w/ s366 turbo
Precision Med Intercooler
24.5/8.5/15 slicks
The official time was:
R/T = .426
60' = 1.792
330 = 4.946
1/8 = 7.353
MPH = 107.98
1000ft = 9.362
1/4 = 10.984
MPH = 140.39
This was my first time with the new turbo and manifold. I'm sure with some seat time and more boost I can get a better time. I'm super pleased with how the car is holding up.
http://www.youtube.com/watch?v=EZqxj-rDvRk
My current setup is the following:
Fully built GSR 84mm
Full Race Top Mount Twin gate w/ s366 turbo
Precision Med Intercooler
24.5/8.5/15 slicks
The official time was:
R/T = .426
60' = 1.792
330 = 4.946
1/8 = 7.353
MPH = 107.98
1000ft = 9.362
1/4 = 10.984
MPH = 140.39
This was my first time with the new turbo and manifold. I'm sure with some seat time and more boost I can get a better time. I'm super pleased with how the car is holding up.
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 343
Likes: 0
From: Oklahoma City, Ok, 73170
Final tune was set on this. Problem was that I didn't know what my exact boost was with this power. We were guessing around 36-38psi. The 10.9 was done at 32 psi of boost in 3rd and 4th. (Hondata kept freezing up everything I made a run on the dyno and at the track.)
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 343
Likes: 0
From: Oklahoma City, Ok, 73170
Trending Topics
very nice congrads, looks alot like my slip but I lit up 3rd gear and lost some time.
Looks like you threw alot more power at it in 3rd and 4th than I did though, you got alot more in that car at the same boost level
Looks like you threw alot more power at it in 3rd and 4th than I did though, you got alot more in that car at the same boost level
I too want to see 10's one day, but its already been a year sense i started my build and not even close to 13's yet. lol! Good job on getting in the 10's!!
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 343
Likes: 0
From: Oklahoma City, Ok, 73170
thanks for a heck of a deal on the turbo...this turbo keeps making power... i actually made more hp than what i set it at for the track...but i was running out of fuel pump on the top end so we brought it back down a bit...

thanks cliff for the new class, it made it a lot more enjoyable... usually i'm stuck racing aaron.. haha i'm thinking about going to dallas and san anotonio now for the next IFO's
good job cliff.. keep it up
Thanks, were you in the race?? Or just spectating? I talked to so many people that day, I forgot who you are..
I was on Rota Slips with M&H slicks. 24.5x8.5x15

thanks cliff for the new class, it made it a lot more enjoyable... usually i'm stuck racing aaron.. haha i'm thinking about going to dallas and san anotonio now for the next IFO's
good job cliff.. keep it up
I was on Rota Slips with M&H slicks. 24.5x8.5x15
don't forget to preregister for the 200+ mile free entry voucher if decide to follow the tour: http://importfaceoff.net/registration.htm
Thread
Thread Starter
Forum
Replies
Last Post
quikB18B
Acura Integra
44
Apr 7, 2004 03:43 PM




