I have a b18a1 block with type r pistons. My question is what head should I put on. I want to just put an ls head on for now. Could I use just a stock b1 head or what? Cause I know the pistons would raise the compression. Thanks.

 

If you have a choice, a vtec head would be the better head(more flow=more power). But you can run a non vtec head in the meantime if you want to..

 

Yeah I was just wondering if having a stock ls head with p73 pistons would make it run badly.

 

http://www.zealautowerks.com/bseries.html

 

Make sure you get a good tune with that increase in CR

 

b18a block
Usdm Itr Piston
Jdm b16 cable tranny.
B17 gsr da head.
2.1/4 piping

Kept up with a 08 civic si. mods i/h/e