*FS* Part out- Kseries 800+hp Turbo kit + MISC
Time has come for me to part out my car. I haven't had this setup very long but its time for me to concentrate my time on other thing then my car.
First on the list is my turbo kit. I have a lot of time and money invested and this is very hard to let go. I have only 2k miles on this kit. Some parts are used which may have more but wouldn't make a difference. Kit was made for DC but would fit a EG or EK with small modifications.
AFI Divided Manifold Dual gated
AFI 3in to 4in DP/Two bungs for O2
Custom Hood Exit Dump Tubes
Precision 6765 Billet Comp .81 On-Center Exhaust/.75 Ported H-Cover
Two Tial Black 38mm MV-S Gates
Tial red 50mm BOV
Precision 750hp Intercooler
Custom 3in aluminum Intercooler piping
4 in Aluminum Intake with Black Blox Veloctity Stack
ATP Coupler/V-band clamps for all connections
Mac Solenoid/Boost Controller
T1 T4 Turbo Blanket
Quick disconnect fittings/hose
Defi Racer Boost
NGK AFX
GE sandwich
-3 Oil feed/ -10 Drain
Type S Oil Pan tapped
I have priced everything out and it would cost almost 5k to piece this kit together. This kit is as complete as you can get besides fuel system. I made 450 at 11psi on a stock CRV motor. With a good engine combo/fuel system, you could make 800+ with this kit. $4000obo

Engine Bay
http://i28.photobucket.com/albums/c2...ion/photo4.jpg
http://i28.photobucket.com/albums/c2...n/photo2-2.jpg
http://i28.photobucket.com/albums/c2...n/Engine01.jpg
http://i28.photobucket.com/albums/c2...n/Engine02.jpg
Turbo Setup
http://i28.photobucket.com/albums/c2...ion/photo1.jpg
Boost Control
http://i28.photobucket.com/albums/c2...ostControl.jpg
Gauge's
http://i28.photobucket.com/albums/c2...ion/Gauges.jpg
Turbo Blanket
http://i28.photobucket.com/albums/c2...rboBlanket.jpg
ASP Custom 4in Aluminum exhaust. No muffler just straight pipe. Two piece design with Vband clamp near the rear trailing arm. $400obo

Vibrant 4" race Muffler. Paid 100 new. $80obo

Misc Fittings- Make offer on what you need
-8 45degree Hose End
-6 to #6 O-ring fitting
-6 Black Anotuff Straight
-7 Black Hose Clamp

Hose- Make Offer
Around 3.5ft of -6 Pro-lite hose. 3ft -4 Auto-Flex


New -10 Turbo Drain- $25obo

Virgin P28 ECU. $80obo

All prices are best offer, shipping not included. Everything can be shipped at buyers expense.
First on the list is my turbo kit. I have a lot of time and money invested and this is very hard to let go. I have only 2k miles on this kit. Some parts are used which may have more but wouldn't make a difference. Kit was made for DC but would fit a EG or EK with small modifications.
AFI Divided Manifold Dual gated
AFI 3in to 4in DP/Two bungs for O2
Custom Hood Exit Dump Tubes
Precision 6765 Billet Comp .81 On-Center Exhaust/.75 Ported H-Cover
Two Tial Black 38mm MV-S Gates
Tial red 50mm BOV
Precision 750hp Intercooler
Custom 3in aluminum Intercooler piping
4 in Aluminum Intake with Black Blox Veloctity Stack
ATP Coupler/V-band clamps for all connections
Mac Solenoid/Boost Controller
T1 T4 Turbo Blanket
Quick disconnect fittings/hose
Defi Racer Boost
NGK AFX
GE sandwich
-3 Oil feed/ -10 Drain
Type S Oil Pan tapped
I have priced everything out and it would cost almost 5k to piece this kit together. This kit is as complete as you can get besides fuel system. I made 450 at 11psi on a stock CRV motor. With a good engine combo/fuel system, you could make 800+ with this kit. $4000obo

Engine Bay
http://i28.photobucket.com/albums/c2...ion/photo4.jpg
http://i28.photobucket.com/albums/c2...n/photo2-2.jpg
http://i28.photobucket.com/albums/c2...n/Engine01.jpg
http://i28.photobucket.com/albums/c2...n/Engine02.jpg
Turbo Setup
http://i28.photobucket.com/albums/c2...ion/photo1.jpg
Boost Control
http://i28.photobucket.com/albums/c2...ostControl.jpg
Gauge's
http://i28.photobucket.com/albums/c2...ion/Gauges.jpg
Turbo Blanket
http://i28.photobucket.com/albums/c2...rboBlanket.jpg
ASP Custom 4in Aluminum exhaust. No muffler just straight pipe. Two piece design with Vband clamp near the rear trailing arm. $400obo

Vibrant 4" race Muffler. Paid 100 new. $80obo

Misc Fittings- Make offer on what you need
-8 45degree Hose End
-6 to #6 O-ring fitting
-6 Black Anotuff Straight
-7 Black Hose Clamp

Hose- Make Offer
Around 3.5ft of -6 Pro-lite hose. 3ft -4 Auto-Flex


New -10 Turbo Drain- $25obo

Virgin P28 ECU. $80obo

All prices are best offer, shipping not included. Everything can be shipped at buyers expense.
Last edited by SlowReaction; Sep 16, 2009 at 02:32 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
a1320addict
Classifieds: Forced Induction
37
Oct 12, 2005 03:47 PM
a1320addict
Classifieds: Forced Induction
15
Oct 10, 2005 02:21 PM





