So I searched and found a bunch of different answers to this problem. I thought I would post my problem and see what people say. Long story short, about 3 weeks ago all of a sudden my car wont go into gear. I have to date replaced the slave cylinder, clutch master cylinder, bleed the line and I have replaced my clutch disc, only thing I havent replaced is the pressure plate because I was hoping it was not that because its $$$ to replace it and I am unemployed and have no money. The car goes into gear when its not running, but wont when the engine is running. Any help is appreciated, thank you.

 

Did you replace with new parts and bleed properly? If so, bleed it again.

If it still acts up, replace your clutch.

 

I feel confident that I bleed it properly, its just been frusturating cause I have pulled the tranny 2 times already and now I have to do it a 3rd time

 

help

 

Pull the trans. Replace the clutch.

 

just wanted to make sure I didnt overlook anything, although I kinda did by not replacing everything at once, instead I have screwed myself by having to take the tranny off for a 3rd time now.