FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of parts!
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 312
Likes: 0
From: San Diego, CA
FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of parts!
Well, the time has come.. parting out my white sleeper sedan.
MAKE OFFERS!! EVERYTHING IS NEGOTIABLE !!!!!!!
I accept CASH & CREDIT CARD through Paypal
It's been through about 6 or 7 engine setups over the years and it's been a LOT of fun. Anything you see on the car is for sale. I'll be returning it to stock and then selling with a stock d16 locally.
I'll be adding more and more items for sale as I go. If you have any questions let me know. Not really hard-pressed to sell, so don't lowball. Open to partial trades + cash.
BUYER PAYERS ACTUAL SHIPPING COSTS IN ADDITION TO ALL ITEM PRICES BELOW
Up for sale:
EVERYTHING IN THE PICTURES IS FOR SALE, IF IT'S NOT LISTED, ASK!
------------------------------------------------------------------------------
- LONGBLOCK w/out ACCESSORIES IS SOLD
- GSR Transmission (no grinds, slight 'notchiness' going into 3rd under WOT, has NEVER popped out of gear)[/b] - $500
- Skunk2 Adjustable Cam Gears - $175
- Skunk2 GSR Intake Manifold - $200
- OBX Fuel Rail - $40
- Carb-Legal DC Header 4-2-1 - $200
- Complete MSD Ignition setup for GSR - Dizzy, External Coil and MSD Ignition Box - $225
- Z-10 Traction Bar - $250
- Jim-Fab Solid Torque Mounts - $150
- AZ-FAB Billet Drive-Side Engine Mount & Rear Billet Tranny Mount (stiffens things up significantly) - $100 for both, $120 for all 3 (2 billet, passenger side stock gsr mount)
------------------------------------------------------------------------------
FASTBRAKES Civic Wilwood 11" 4 piston kit - $600
These brakes have been used and well cared-for. I purchased fresh replacement slotted rotors and brand new Wildwood brake pads from FASTBRAKES mid last year. The car has been non-op'ed and not driven much since the brake service. I'd estimate around 2-4k miles on the replacement Wilwood rotors and Wilwood pads.. which is NOTHING. I drove aggressively on the pads and rotors included with the kit for over 100k miles! And they still had life left in them!
For more pics of the actual install a few years back.. check here:
http://autodiscussion.net/forums/ind...pic,104.0.html
http://www.fastbrakes.com/ProductDet...Civic+140+8695
------------------------------------------------------------------------------
BLING BLING GSR Valve Cover (CHROMED & CUT CAM COVER) - $100
SKUNK2 BILLET WIRE PLUG COVER - $90
BILLET RED OIL CAP - $40
------------------------------------------------------------------------------
Grant Steering Wheel (with adapter) - $50
Black Tweed-Wrapped Sedan Dash - $150
------------------------------------------------------------------------------
Do-Luck Chassis Floor-Brace - $150
Came out of an EK but has several inches of adjustment, so should fit many applications with similar wheelbases.
------------------------------------------------------------------------------
GSR Evap Solenoid - $40
- Omni-Pak Ignition System - I've never used this ignition on any of my cars, it was given to me from a friend. Selling as is, untested. -- $60
- Focuz SOHC 4-2-1 Header (no carb # on it) -- Make Offer
- 96-99 OBDII Civic DX Auto ECU -- $70
- 96-99 OBDII Civic EX Manual ECU -- $100
- Skunk2 obd2 to obd1 conversion harness - Was modified for SAFC but has had it removed. -- $50
- Energy Suspension Bushing Kit for EG (Missing Front LCA Bushings, pretty sure everything else is there. If there is something in particular to want to make sure is included please pm. -- $40
------------------------------------------------------------------------------
MAKE OFFERS!! EVERYTHING IS NEGOTIABLE !!!!!!!
I accept CASH & CREDIT CARD through Paypal
It's been through about 6 or 7 engine setups over the years and it's been a LOT of fun. Anything you see on the car is for sale. I'll be returning it to stock and then selling with a stock d16 locally.
I'll be adding more and more items for sale as I go. If you have any questions let me know. Not really hard-pressed to sell, so don't lowball. Open to partial trades + cash.
BUYER PAYERS ACTUAL SHIPPING COSTS IN ADDITION TO ALL ITEM PRICES BELOW
Up for sale:
EVERYTHING IN THE PICTURES IS FOR SALE, IF IT'S NOT LISTED, ASK!
------------------------------------------------------------------------------
- LONGBLOCK w/out ACCESSORIES IS SOLD
- GSR Transmission (no grinds, slight 'notchiness' going into 3rd under WOT, has NEVER popped out of gear)[/b] - $500
- Skunk2 Adjustable Cam Gears - $175
- Skunk2 GSR Intake Manifold - $200
- OBX Fuel Rail - $40
- Carb-Legal DC Header 4-2-1 - $200
- Complete MSD Ignition setup for GSR - Dizzy, External Coil and MSD Ignition Box - $225
- Z-10 Traction Bar - $250
- Jim-Fab Solid Torque Mounts - $150
- AZ-FAB Billet Drive-Side Engine Mount & Rear Billet Tranny Mount (stiffens things up significantly) - $100 for both, $120 for all 3 (2 billet, passenger side stock gsr mount)
------------------------------------------------------------------------------
FASTBRAKES Civic Wilwood 11" 4 piston kit - $600
These brakes have been used and well cared-for. I purchased fresh replacement slotted rotors and brand new Wildwood brake pads from FASTBRAKES mid last year. The car has been non-op'ed and not driven much since the brake service. I'd estimate around 2-4k miles on the replacement Wilwood rotors and Wilwood pads.. which is NOTHING. I drove aggressively on the pads and rotors included with the kit for over 100k miles! And they still had life left in them!
For more pics of the actual install a few years back.. check here:
http://autodiscussion.net/forums/ind...pic,104.0.html
http://www.fastbrakes.com/ProductDet...Civic+140+8695
------------------------------------------------------------------------------
BLING BLING GSR Valve Cover (CHROMED & CUT CAM COVER) - $100
SKUNK2 BILLET WIRE PLUG COVER - $90
BILLET RED OIL CAP - $40
------------------------------------------------------------------------------
Grant Steering Wheel (with adapter) - $50
Black Tweed-Wrapped Sedan Dash - $150
------------------------------------------------------------------------------
Do-Luck Chassis Floor-Brace - $150
Came out of an EK but has several inches of adjustment, so should fit many applications with similar wheelbases.
------------------------------------------------------------------------------
GSR Evap Solenoid - $40
- Omni-Pak Ignition System - I've never used this ignition on any of my cars, it was given to me from a friend. Selling as is, untested. -- $60
- Focuz SOHC 4-2-1 Header (no carb # on it) -- Make Offer
- 96-99 OBDII Civic DX Auto ECU -- $70
- 96-99 OBDII Civic EX Manual ECU -- $100
- Skunk2 obd2 to obd1 conversion harness - Was modified for SAFC but has had it removed. -- $50
- Energy Suspension Bushing Kit for EG (Missing Front LCA Bushings, pretty sure everything else is there. If there is something in particular to want to make sure is included please pm. -- $40
------------------------------------------------------------------------------
Last edited by cha5e; Sep 11, 2009 at 11:53 PM.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 312
Likes: 0
From: San Diego, CA
Re: FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of part
Longblock is already sold, but any accessories or bolt-ons in the pics are for sale as well
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 312
Likes: 0
From: San Diego, CA
Re: FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of part
Thanks guys! Yeah I love my brakes, I'll be sad to see them go..
I'd ship transmission but you'd have to cover all shipping costs completely and really good rep. I'd prefer a local buyer.
I'd ship transmission but you'd have to cover all shipping costs completely and really good rep. I'd prefer a local buyer.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 312
Likes: 0
From: San Diego, CA
Re: FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of part
Updated pic of brakes and added pics of the cam gears, mounts, and another one of the engine bay. Bump for the night crew!
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 312
Likes: 0
From: San Diego, CA
Re: FS: Parting out the Sedan - FASTBRAKE WILWOODS, ALL-MOTOR GSR MODS - Lots of part
I don't believe it to be a replica. I've spent countless hours matching it up to other reps I've found and looked exactly like the only "known" authentic do-luck bar I've come across. There was sticker residue on the bar in the same spot I've seen the stickers on the one Do-Luck bar when I got it but no do-luck sticker or etching.
