on a 91 integra. how would i go about this? its pretty far down in there.
do i remove everything above it to get to it? or remove it from under the car?

sorry hella n00b.

 

under the car

 

according to the manual, you need to pull the driver side axle to get it out. there is a link in the faq on how to do it without taking the axle out, but its broken so.....

 

when i did mine i just pulled the fuel rail off and it was easy

 

ive done it a few times yea you have to pop out the axle i took off the arm at the top to actually loosen the axle i just leave it attached to the wheel bearing while i work and you have to take off the alternator mount it has 3 bolts. it took me a while at first but you figure it out.