FL Selling my Black 91 Civic Si with built B16A
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 680
Likes: 0
From: Central, Florida, United States
Selling my Black 91 Civic Si with built B16A
Time for something new.
list of modifications:
Exterior:
Paint in august of last year,
i have the receipt from the painter
Rota Slipstreams with 205/50/15 Dunlop DZ101 tires.
Suspension:
Koni struts with Ground Control Coilovers.
rates are 400lb Front 600lb Rear
25mm Suspension Techniques Rear Sway Bar with ST bushings and brackets
all new wheel bearings, studs, balljoints, and axles.
Engine:
First gen JDM B16A
Block has been bored over to 82mm with 11:1 compression cast pistons
Block was also decked/resurfaced
Rods are stock with arp rod bolts and they are re sized/honed
crack micro polished
bottom end was balanced to over 10k
i have all the papers for the machine work for the bottom end
Head has been decked/resurfaced
new seals, valve job
Skunk2 tuner series titanium dual valve springs and titanium retainers.
Skunk2 Tuner series 2 camshafts
Cometic head gasket
Innovative Billet Mounts with upgraded Race bushings.
the whole motor has just over 3100 miles on it. it is brand new.
its running on a chipped p28 tuned with chrome.
Transmission:
Cable YS1 GSR transmission.
This is a very rare transmission, it has a long first, 2-4 from a 99-00 Si, and i put an LS 5th gear in it also.
All bearings are brand new, all bronze dog teeth brand new, brand new synchro sleeves OEM from honda. brand new 3rd gear OEM from honda.
Exxedy stage 2 clutch with heavy duty pressure plate
I GUARANTEE YOU THIS TRANNY DOES NOT GRIND. Essentially it is a BRAND NEW tranny with about 1200 miles on it. I do not want to let this go with the car but i really have no alternative. the tranny alone i have over a 1000 dollars into.
also has an odyssey PC680MJ battery and bracket
overall this is a really really fun car. its a blast to drive, handles like a gokart and it has plenty of power right there when you need it. I am the second owner of this car and i did every single modification on this car myself. i bought it bone stock in August of 2008.
Im asking for 5000 or best offer. And i would trade for a super clean 96-2000 Hatch or Coupe, or a 94-01 Integra
ill let the pictures do the talking!
IF you have any questions feel free to ask!
list of modifications:
Exterior:
Paint in august of last year,
i have the receipt from the painter
Rota Slipstreams with 205/50/15 Dunlop DZ101 tires.
Suspension:
Koni struts with Ground Control Coilovers.
rates are 400lb Front 600lb Rear
25mm Suspension Techniques Rear Sway Bar with ST bushings and brackets
all new wheel bearings, studs, balljoints, and axles.
Engine:
First gen JDM B16A
Block has been bored over to 82mm with 11:1 compression cast pistons
Block was also decked/resurfaced
Rods are stock with arp rod bolts and they are re sized/honed
crack micro polished
bottom end was balanced to over 10k
i have all the papers for the machine work for the bottom end
Head has been decked/resurfaced
new seals, valve job
Skunk2 tuner series titanium dual valve springs and titanium retainers.
Skunk2 Tuner series 2 camshafts
Cometic head gasket
Innovative Billet Mounts with upgraded Race bushings.
the whole motor has just over 3100 miles on it. it is brand new.
its running on a chipped p28 tuned with chrome.
Transmission:
Cable YS1 GSR transmission.
This is a very rare transmission, it has a long first, 2-4 from a 99-00 Si, and i put an LS 5th gear in it also.
All bearings are brand new, all bronze dog teeth brand new, brand new synchro sleeves OEM from honda. brand new 3rd gear OEM from honda.
Exxedy stage 2 clutch with heavy duty pressure plate
I GUARANTEE YOU THIS TRANNY DOES NOT GRIND. Essentially it is a BRAND NEW tranny with about 1200 miles on it. I do not want to let this go with the car but i really have no alternative. the tranny alone i have over a 1000 dollars into.
also has an odyssey PC680MJ battery and bracket
overall this is a really really fun car. its a blast to drive, handles like a gokart and it has plenty of power right there when you need it. I am the second owner of this car and i did every single modification on this car myself. i bought it bone stock in August of 2008.
Im asking for 5000 or best offer. And i would trade for a super clean 96-2000 Hatch or Coupe, or a 94-01 Integra
ill let the pictures do the talking!
IF you have any questions feel free to ask!
Last edited by si vtec ftw; Sep 13, 2009 at 08:35 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 680
Likes: 0
From: Central, Florida, United States
Re: Selling my Black 91 Civic Si with built B16A
bump!
will ship car if buyer covers cost!
PRICE IS OB PEOPLE!!
i may consider parting out, so if you want to make an offer on the shell, motor, tranny, suspension, wheels, mounts, anything, PM me!
will ship car if buyer covers cost!
PRICE IS OB PEOPLE!!
i may consider parting out, so if you want to make an offer on the shell, motor, tranny, suspension, wheels, mounts, anything, PM me!
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 680
Likes: 0
From: Central, Florida, United States
