I am completely parting out my 1997 4 door integra. Car started out has a LS and is now a LS/Vtec with a built bottom end. So whatever you need just let me know. I'll give you a price shipped. I'll list the specs on the engine below.

B18B1 Block with B16 head

Block from 96 LS
bored to 82mm with weisco 9.5:1 pistons
eagle connecting rods
stock LS crank polished and balanced
new water pump
ARP Head studs
ARP rod bolts (NOT INSTALLED but included)
Golden Eagle LS/Vtec conversion kit:
Oil filter sandwich adaptor with -6AN steel braided line to head
LS/Vtec dowel pins
LS/Vtec 82mm headgasket

B16 head from 2000 Civic Si - stock internals
AEM Tru Time adjustable cam gears

Will include P28 ECU chipped and socketed with Hondata S100 along with ODB2a to ODB1 jumper harness

Block has approximately 18,000 miles
Head milage is unknown. I just performed a leak down test and compression test 2 days ago. Leak down showed all 4 cylinders under 10% leak, and compression showed the following:
Cylinder 1 - 190
Cylinder 2 - 180
Cylinder 3 - 190
Cylinder 4 - 190

I can also redo these test to be witnessed and/or for pictures.

I have a little over $3000 into the block alone for parts and labor.

Asking $1500 for complete engine with ecu; $1350 without ECU and jumper









I also have OEM Black Leather Front Seats: $200 for pair. Seats in great shape except where I put a small tear on the back of the passenger seat




Here are some other things I have in the car besides the regular stuff.

B&M straight (no bend) short throw shifter with Skunk2 weighted **** - SOLD
Gauge Bezel Gauge pod (no gauges)- $10
Extra starter - $20
Extra ODB2 LS dizzy - $30


I'll try to add stuff as I think of it or just ask me.

ADDED 9/11/09

OK I decided I am willing to part out the engine BUT ONLY to sell the complete top end or the complete bottom end. I am NOT going to start selling misc items off the engine.

Complete B16 head - includes head, internals, valve cover, fuel rail, injectors, AEM true time cam gears, intake manifold, distributor, spark plugs and wires, and throttle body. FIRM $400 plus shipping

Built LS block (see specs above) - $1000 obo

Here some pics of the car taken today (9/1/2009)

 

does the antenna work?
Driver fender condition?

 

Antenna has been shaved and is gone. driver fender has two medium sized dents

 

bump

 

how about the ABS modulator.... Is it in good condition. Any leaks?

 

no has no leaks and works fine, it is missing a small plastic piece where you fill it with fluid, under the rubber cap

 

Doubt it but would you sell the crankshaft? I just picked up a ls bare block, building an ls vtec for my 00 si.

 

No sorry looking to sell engine as a whole

 

Uea I figured as much, well bump for a marylander!!!

 

bump

 

bump BUY MY SEATS!!!

 

morning bump

 

Skunk2 ****, short shifter, type r boot, kick panels, driver A pillar, all seat belts (not buckles), windshield moldings, side skirts, rear lip, ECU, Si wheels, master cylinder reservoir ALL SOLD!!!!!!!

 

One of the biggest honda community sites and no one needs any of these parts? I'm letting this stuff go cheap!!

 

Hello there, from the top.

 

to the top

 

Selling the rear seats?

Pics?

 

They are cloth not leather. Is that what your looking for? I can get some pics for later today when I go to the car.

 

what about the sideskirts and rear lip?

 

wanna sell the whole head...

 

Ill geet those gsr leathers
Lmk bro!

I also need the ebrake console and the black ebrake stuff.
Hm, i need a lot of little pieces.
Gas lever and trunk lever in black, headliner in black, The handle and window switch covers for all 4 doors
Pm me ill get ya a complete list

 

sorry i just sold them yesterday

as of right now I am looking to sell the engine as a whole. Have a potential buyer picking up the engine on Friday.

PM sent

 

Yep...looking for black cloths

Pics would be great...thanks

 

i need all 4 of the black door panels, headliner, all the plastic pilars..pm me if you still have them.