Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.

 

WILLING TO PART OUT STARTING W/CHASSIS $7000.00, civic coupe, ls vtec turbo, full chromally cage w/wheelie bar and chute. all interior sheet metal panels, mb products 1 piece front end, doors, trunk lid and dash, weld wheels and rpm rear susp w/drag magnum rear wheels, custom paint and air brush, too much to remember and list, 10 sec turn key car and consistant. also comes w/20 foot carson enclosed trailer w/air brush on rear door. I will sell car w/out trailer for $10,000 firm hard times forces sale, serious inquires please. $13,500 firm, no trades. NO BULLSHITERS, email for additional pix or call me @ (562) 201-0117 cell, (760) 245-8353 after 5pm














R.C 310 Injectors, nothing wrong. used on a street car w/nitrous. $125.00


Golden Eagle cam gears for B-Series, $125.00 and I will pay shipping and Pay pal charge.




RPM Rear susp for 92-95 civic, integra, brings rear wheels inward for no rubbing and able to drop car rear low. very light and all aluminum w/all adjustable hiem joints. disc rear brakes w/cross drilled rotors, Apex rear struts w/300 lb spring, no brake lines. all complete. No Wheels $650.00






Burns Stainless Ultra Light Muffler, part#SM-350-450-12, 12 inch lenth, 3 1/2 inch @ each end and 4 1/2 diam. will ship, $150.00 plus paypal fee.




Skunk Center pipe for 92-95 civic, polished, still in bag, will ship $100.00 plus pay pal fee.

 

FS: MoTeC M400, Mil-Spec harness, T1 cam trigger with red Golden Eagle cam gear, MoTeC UTC CAN adaptor. Comes with mounting plate, relays, etc. Mint condition. $5000 shipped in the states via FedEx insured with tracking number.





FS: Aluminum 4" exhaust with burns muffler. Came off my 2000 civic HB. SOLD

FS: Sparco 5 pt harness. SOLD

 

for sale
FR b-series top mount t3
4in dp
44mm tail wastegate DUMP TUBE (no wastegate)
GT35R (made 670 whp)
package deal 2200.00

1000cc precision inj 200.00
precision 750 IC 375.00
dss level 5 axles with hubs and half shaft (SOLD)
GSR short block sleeved arias pistons eagle rods made 670whp on 24psi 2100.00 obo ( this setup ran 9's )
black innovative mounts race compound 265.00
full blown intank duel pump setup hangar and both walbros 425.00


pm for pics and info

JT

 

M&W pro-10 single channel cdi ignition box. Falling edge trigger only. its the older version that cannot be switched via jumper. Will work with Volkswagen's or any other car that uses falling edge trigger. $375obo

 

I have both sets of cams both from the yr 2000.

400.00 plus shipping for each set.

cams are pretty much identical becuase of the year. the CTR's the intake cam has *3 difference in duration, maybe a 8-10hp difference.

Notice the potruding rings

 

T1 Can sold

New AEM Fuel Injector Driver, 300 shipped. Not sure what they are going for, so if it's too much let me know.

Thanks!
-Ryan

 

golden eagle i/m for b16a/itr heads. fully polished $600


ITR head comes w/ itr cams, supertech springs and retainers, stock ports $800



clutchmaster stage 5 4puck unsprung clutch for h22. Brand new $300

 

I have for sale a magnus intake manfold for sale for and h22 boosted or allmotor my 11.5cr h22 made 286whp and 214tq
going with a itb setup

so you get manifold that takes 3months to make..
new 76mm tb
new silver aem fuel rail
and fuel reg
i paid 900.00 for the maifold
250 for the t/b
150 for the rail and 200 for the reg
=1500.00
I let it all go for 1200.00+shipping







call 541-404-0203 or pm me

 

I have a set of 15x8 5 lug rota slips with slicks for sale plenty of meat looking for $450 open to offers they were never ran on my car just put on for pictures they weigh next to nothing. and they clear itr brakes so most people shouldent have any worrys with the back spacing.

and also a peakboost pwr intercooler they said its rated for 475hp i made 400plus with no problems make a offer

 

NAME A PRICE.... SEND ME A PM(Ill ether say no or you will get it for that price)

Don't Lowball me, just make resonable offers... Cash only NO Trades! Send pms...
I can ship.. Paypal fee is 3%


Used Wiseco 89mm Pistons w/ Gas Ports - $350.00 obo
(Upgraded Wrist Pins, less then a 500 miles barley broken in)
Also on ebay but will sell on here, (Buy it now price gets everything listed on ebay page).
,


Precision 980cc Injectors - $250 obo
,

FJO Injector Driver 4 Channel #KID0404 (Brand NEW) - Sold

ARP Head Studs GSR #208-4303 (Brand NEW) - Sold

RLZ Head PR3 with a set of Skunk2 Cam Gears(Same as Type R).. RLZ Vavle Job, RLZ Vavle Springs and Retainers... - $900 obo
0 Miles, All New Valves, Seats, Seals and locks.
,


Darton H22 Mid Sleeves - Sold

H22 Autolite Spark Plug Wires (Brand NEW) - $40 obo


TEIN EDFC #EDKU1 101000 - Pending Sale



I also Chip ECUs, I can chip them for 50$ plus shipping. You can ether purchase a ecu or send me yours. Right Now I have 3 P28s, a P72, a PR4, P75 and a P05.

P28 Virgin = $125
P72 Virgin = $150
Non Vtecs = $60

Here is the Soldering Iron I use.

 

Motor is as follows: $4000+shipping!!!! Will Come with everything listed below.

LS block
GE Sleeves w/Orings
CP 84mm pistons with upgrades wrist pins (flat tops 10:1 cp)
Manley rods (LS)
LS crank
Clevite Bearings
OEM Oil/Water pump
LS oil pan Tapped
GE LS/Vtec Kit
GE 84mm head gasket
GSR Head
Fully Ported and Polished by Ryan@Warr heads
GSR Cams
Supertech Springs/Retainers
Supertech Inconel Exhaust valves
Bronze guides
Valve Job
High Amp Alternator
Wiring Harness included
3 Distributors wired for the external coil, 1 LS, 2 GSR's
Edelbrock Intake Manifold (intake port matched)
Stock GSR throttle body
Starter

**Mounts/Trans/Scatter Shield/Breather Kit/Fluidamper NOT Included!**




Garrett 4294 Journal Bearing $650 Shipped!
Includes Gasket, Feed/Return lines and fittings.







4" Down Pipe w/flex $250 shipped
VERY well constructed to fit RIGHT up against the slave cylinder and oil pan for a tight
fit to help keep room for traction bar & engine catch pan.


[IMG]http://i1013.photobucket.com/albums/af252/Barbs801/22.jpg[/IMG

Exedy Twin disc Clutch $950 SHIPPED!
Has Ten Passes on it and approx 200 miles total!





Avid Traction bars $275 SHIPPED!
IN NEW condition!



PLX Wideband w/bosch sensor $200 Shipped

AEM Boost solenoid $75 shipped

MSD Digital 7 Plus Prog (#75314 4 cyl apps only) $625 shipped
PRETTY MUCH BRAND NEW!!! Only used for 3 passes and 15 dyno pulls.
Will include Serial Cable with IOGear USB adapter cable.
And Wiring Harness if wanted, Shielded Air Craft Wiring was used and need to be grounded.
Shielded wiring reduces electric interference from the box and ECU.


MSD Dig 7 HVC II Coil $150 shipped
IN BRAND NEW CONDITION! Used for 3 passes and 15 dyno pulls!


Del Sol Dual Core Radiator w/slim fan $100 shipped




Full Racing Suit $300 shipped
Shroud Pants - SFI Cert 3-2A/5 - Large
Shroud Jacket - Double lined SFI Cert 3-2A/5 - Large
Simpson Shoes - Size 12
Shroud Gloves - SFI Spec 3.3/1 - Medium
Shroud Neck Brace - SFI Spec 3.3





VIS Invader Carbon Fiber Hood $250 (local pickup only, not worth the price to ship)


1994 Acura Integra GSR Black Chassis: $3250!!! Local pickup only!

10 pt Cage, not cert yet but built for certification to 8.50's. Just needs the sticker!
Custom fitted MR Window net
Certified shroud 5 pt Harnesses (both drivers and passenger)
Shroud Parachute
Innes Cutoff Switch
Rolling on stock struts/springs
OMNI Camber Kit (front)
Powder coated wheel with Toyo Rears, Falkin Front tires
Aeromotive Eliminator Pump
Dual summit filters with 100 michron inserts (before and after the pump)








Paypal address is SupraTT_T78@hotmail.com

Jason
801-879-4940.
I do have texting so. Text me if ya got questions.

 

aem ems 30-1010 650.00
aeromotive eliminator--350.00
aeromotive FPR-100.00

 

man get this stuff out of here hahah
Nuformz rear brake / shock set up for EG spindle style with rims and tires 2000.oo

Eg fiber doors and hatch skin 400.oo

Carbon fiber dash for eg 300.oo



Email me any serious questions about sale of trades cars are all ready to ship....

Sport Cobalt - Sport Ek - Street Eg - SuperCharged Aveo - Hot Rod rex - Xtrac - GoldRush 40 foot trailer

















Jason@RageImports.com for any real serious buyers thank you for looking.

 

1600cc injectors $250
aem injector driver box $250
brand new s372r $1400
skunk2 tuner 1 $400
skunk2 tuner 2 $400
typer r suspension with DSS 5.9 axles $1800
5lug welds 15x8 with 26x10 slicks-15x3 with 26x 4.5 tires $1000
aeromotive eliminator pump $300

 

Sold

 

Hey Everyone,

Selling a Brand New B-Series PPG Gearset. This set includes 1-4th gear, Final Drive Gear for GSR, brace in place of 5th, and a case brace.

1st 3.0
2nd 1.917
3rd 1.333
4th 1.045
FD 4.4

Retail $6200
Selling $5700

If you have any questions at all, please feel free to email me at henry@full-race.com or PM me at anytime.

 

used full-race GSR intake manifold, 8 injectors on the top. will sell with or with out the injetors. injectors are fuel injector clinic 1000cc peak and hold. no throttle body. make offer




used garrett 12x24x4.5 intercooler $650, really do not want to ship it.






used full-race t4 dual gate manifold, bullseyepower s372r, 4" full race downpipe, 2 dump tubes (no wastegates) make offer

 

Function 7 one-piece billet T3/T4 Turbo Oil Inlet Flange with a male -3 AN (JIC) flare fitting machined directly onto the flange. Like all Function7 products, these fittings are precision machined out of the strongest, airframe grade 7075 aluminum, and is 18-20% stronger than 6061 grade aluminum. like new!
$10


Del sol dual core radiator purchased from radiatorbarn.com Has around 5,000 miles on it. No cracks,leaks.. Also comes with 2 electric fans both pushers. Everything is in working condition, upgrading to alumiunum radiator. $75 for everything pictured!



Aluminum 2.5” intercooler piping made by S&R performance. Tested to 100psi with zero issues. Light and dissipates heat quickly. flanged for Tial BOV. $200 with all clamps and couplers. Fit DC/JDM integra, may fit others as well.



1 coupler and clamp had to be removed due to needing it on my other car.

 

prices do not include shipping or paypal fees...
Crower springs and titanium retainers, about 4500 miles. $300


YS1 LS cable tranny from 92-93 with HAsport cable to hydro kit. needs 3rd gear synchro. $275 or I can put in a new synchro for additional cost.



really need this stuff gone so I can buy more stuff to go faster...

 

Freshly built 84mm Sleeved M.I.D. ERL Block(0 miles since rebuild) $2500
10:1 JE forged pistons, Crower rods, new acl race bearings, new pickup, new oil pump, new gaskets





Precision 1600cc injectors $300 shipped


Edelbrock intake mani for gsr $300(ported runners to hondata gasket and plenum ported to 72mm)


Sparco seats $550 or $300 each



Kirkey aluminum racing seats $450 for both or $250 each



Avid shift linkage for ef $100

15lb bottle $150

 

Wastegates
-x2 tial 44mm wastegates w/ push lock fittings (silver)

Turbo
-Borg Warner s368 1.00 a/r turbine housing w/ v band clamps $1000
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

BOV
-Tial 50mm BOV (silver) $175

Oil pan for -10 return $200

-Injector dynamics 1000cc injectors $400 or $420 with obd1/ev1 adapters
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-Full-Race traction bars w/ cakes fab battery mount for odyssey and radiator mount kit!!! pc680 $275
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-BDL 70mm TB ( custom block for IACV also come with honda TPS) $300
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-EP3 trans w/ quiafe (no grinds, shifts great) $1200

-Rsx-s axles $200

-Circuit werx hubs w/ studs includes civic knuckles and new honda wheel bearings and ball joints $450
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-HAsport EGk1 motor mounts $450
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-Polished lenso vpd’s (scratched from on the inside from manufacture) with m&h 25’s (9 passes on them) $500
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-(new)AEM EMS for kswap cars $1200
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-AEM 3.5 bar map sensor $100
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-(new)Eagle rods $250

-(new)Wiesco pistons 9:0:1 86.5 $450

-(new)Cometic MLS gasket $75
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-PWR radiator $175
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-Rad hoses for k swap $50
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-ITR valve cover $100

-ITR seats $400

-Braille battery $100
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-02-04 rsx harness $200
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-custom BMC resivoir sheild made of SS $50
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

-Omni Front upper control arms $125
http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

 

F/S Used Precision Turbo PT74 Dual ball bearing this is a used turbo 74mm with a turbin housing of .81ar. The turbo has been lightly used and is in good condition. Must sell turbo**Lowered Price**

GSR oil pan slight dent 20.00
GSR oil pick up 10.00

 

^^^^^^^^^ hey genius, prices would surely help a sale............ ^^^^^^^^^

 

Crower Billet Rods for B20 & LS motors- Used but in good shape. $400 OBO Shipped







MSD 6AL box- $100 OBO shipped