wondering if the abs/wheel sensors from the em2 will work with the dc5 conversion...pretty sure they will but b4 i start on the project i just wanna make sure that i wont run into that problem with me having to get all 4 sensors b4 i start.

if someone cld reply asap that wld be great
thanks

 

The ones off of your stock rear drums won't work, ran into the same problem with my rear disc swap. I got both sensors, yet my ABS light still came on

 

so i guess the front would be the same?...damn so i gotta look for all 4 sensors b4 i do the swap?

 

I think the fronts are the same.
Are you doing base/ep3 front calipers/rotors or type S?

 

i hav a k series going in and have the whole 5 lug disc brake conversion off a rsx type-s and needed to know just if my em2 sensors would work, that way i dnt hav to buy the rsx sensors, just so i can do the conversion asap...they shld.

someone let me know plz

 

The fronts should be OK. If I have a minute tomorrow, I'll pull one of my front wheels off and take a look. I have a EP3 front sensor to compare it to.

 

naw, they aren't the same, get rsx front sensors. the axle gets in the way of the sensor and it'll tear that sensor to pieces.

get rsx-s ones.

 

so i only really need to rsx sensors the rest i can use em2?

 

fronts rsx-s
rear ep3 or rsx, base or type s