Name; Daniel
Location; Central Florida
Contact; dvsdude09@hotmail.com
Item; D series turbo kit etc
PayPal certified
Price is 900 SHIPPED

Spare intercooler sold to trustdestruction
Turbo kit sold to zb12691!!

I am so over my D series bullshit, Its being parted out and swapped ASAP

Up first is my COMPLETE turbo kit, I am NOT parting out at the current time, I want to sell it as a whole, on 9lbs this set up made 230/182 it is currently tuned on 6lbs because stock clutch could not hold 9lbs With my average driving skills and a almost done clutch it went 14.7@98.xx Car still has another 3/10ths in it even 1/2 a second. No oil leaks, You will need to tap your own oil pan because Mine does leak from there

Included Items
T3/T04e .57 trim turbo
3inch down pipe with flex pipe
Log manifold
Generic waste gate
Dump Tube
All charge piping
Generic intercooler 24x6x2.5
Greddy type S bov
RC440 injectors
Blitz turbo timer
Oil sandwich adapter for your feed line
feed line and return line
37820-P06-A50 from d15z1 ecu tuned with Ectune
All couplers and T-bolt clamps

I will be keeping my OBD1-OBD2 jumper harness for my swap.
This is literally everything you need to turbo your stock or mildly built y8
AS LONG AS THE MOTOR IS IN GOOD ENOUGH CONDITION FOR BOOST I will not be responsible for ANY damage that happens to your motor, Boost is just as dangerous as it is fun. This set up was run on a stock radiator for a long while as well.

I am asking 900 OBO I am willing to negotiate as most items are used but in good condition. This is just about everything you need to turbo your car as I know a lot of you want to do. I need to fund my swap


Just because it has some surface rust doesn't mean its no good


charge piping and greddy BOV


RC 440's


Blitz turbo timer


PO6 obd1 ecu

 

 

bumppp

 

Thanks man, Bump because its OBO and I am willing to ship

 

Throw me offers I need to get this sold.

 

is this ac, ps compatiable?

and what brand is the turbo?

 

what kinda of power did you make? On stock clutch? Im very interested!

 

It is PS compatiable but not a/c, the turbo is a generic ebay brand but it has held up VERY well and I have had no issues with it what so ever

On 9lbs the car made 230whp and 182 ft/lbs of torque. But with my stock clutch being wrather worn etc It is currently on a 6lb tune so I would assume around 200ish whp and 160's ft lbs. The set up moves for only being on 6lbs and in my full interior coupe plus tools and me it has surprised quite a few people

 

bump for the view

 

manifold is a/c compatible not dp

 

thank you for clearing that up I know that to run A/C you want a smaller down pipe but I wasn't going to say for certain since not all log manifolds are a/c compatible but thank you. bumppp

 

Bump because I'm entertaining all offers and I need to get this gone!
Willing to ship!

 

Very interested man, any shaft play in the turbo? Are you including the 6 and 9 lb wastegate spring? Who tuned the car and how do you switch back and fourth from the 6 and 9psi tunes? Im willing to work something out soon!!

 

You have a PM good SiR

 

Daniel,

I've sent a PM. I'm interested.
First time to post, but have been lurking for a while.
Are the oil feed and return lines braided stainless?

 

any trades?got a gsr motor..

 

You have a PM back good SiR

And you have PM as well

 

Bump, still need this sold

 

Bump because I know somebody needs a COMPLETE turbo kit for their D series

 

i know you don't want to part out but since there are two, would you be willing to sell one of the intercoolers separate?

And you're from CFL? Haha, me too. "inbetween the power plants"... you wouldn't happen to live in Pt. St. John would you? If you do, hell, I could pick the intercooler up from you (I live in Titusville) and you wouldn't even have to ship it.

 

You have PM about second intercooler
Bump because this is still for sale and I know somebody needs to turbo their D series

 

To the toppp I know out of you 700plus people 1 of you needs this and I need it gone. My LS is calling for pistons and rods
Throw me an offer!

 

PMed

 

PM me back i think i'll take it !!

 

bump