PA: Morales Flatland Bike
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 4,126
Likes: 0
From: PA
PA: Morales Flatland Bike
I have a red Morales flatland bike. The bike has a dual top tube design so you can run duak cables from the gyro straight to the rear brake. I will try and list all the parts on the bike as what i know they are.
Tech77 Brake Levers, 990 brakes, Kore Fork with 990 plate bolted on, 4 piece "Strip Bars" handle bars, TNT Stem, Odyssey sprocket, 1 piece crank, Peregrine Pedals, Peregrine 48's rims(Sealed front wheel and Nankai freecoaster), Primo Tubesteak Pegs
The bike is in pretty good condition. Has some scratches on the bottom of the rear chainstays and a paint chip next to the M welding between the two toptubes. There are scratches on the pegs also. The bike has been sitting for a while so I would go through and tighten and adjust everything. Also redo the brake setup. Pegs are scraped up also.
Tech77 Brake Levers, 990 brakes, Kore Fork with 990 plate bolted on, 4 piece "Strip Bars" handle bars, TNT Stem, Odyssey sprocket, 1 piece crank, Peregrine Pedals, Peregrine 48's rims(Sealed front wheel and Nankai freecoaster), Primo Tubesteak Pegs
The bike is in pretty good condition. Has some scratches on the bottom of the rear chainstays and a paint chip next to the M welding between the two toptubes. There are scratches on the pegs also. The bike has been sitting for a while so I would go through and tighten and adjust everything. Also redo the brake setup. Pegs are scraped up also.
Last edited by Gold DA9; Sep 6, 2009 at 12:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
