on my 99 civic ex, just today i was driving and shifting fine and all of a sudden i couldn't shift into gear any more. so i had too turn off car. but when i turned off car, i could easily shift to any gear smoothly...... i had too drive in 2nd gear all the way home.... so i decided to bleed the system. all of a sudden it started leaking at the slave. i took it apart thought it was a bad slave but it wasn't. so i was going to replace it, but that wasn't the problem. i decided to take a 2nd look, my fork was really loose and had alot of play. just wondering what had cause this problem.

everything is stock never replace anything.
HERE THE VIDEO

[media]http://www.youtube.com/watch?v=Me7SLcZyRvQ[/media]

 

it should have a slight bit of play, but no too much.

 

does anybody knows why mine would be so loose. could there be a chance that the throw out bearing went out, and disconnected by the fork...or bearing was stuck somewhere in the pressure plate.....please let me know so i know its not my tranny

the tranny never had problems, never had grinds, and only 135,000 miles.

 

got the video up.

 

took tranny off. found out it was a broken fork, fork was broken in half. any one know where i can get a new fork?

 

junkyard, dealership, eBay... just to name the OBVIOUS ones...