Can someone please tell me where the Fast Idle Thermo Valve is located? I'm throwing code #14 and I really don't know what its talking about...Thanks

 

code 14 is iac. the fast idle is mounted to the bottom of the throttle body.


[Modified by Salvatore Leone, 3:26 PM 8/24/2002]

 

I already changed out the IAC valve sensor, but I'm still throwing that code.

 

what motor is this? is it a swap?

 

SH motor, but its in a base model prelude. I hydrolocked my last motor, and now have an SH motor, but with base model tranny and ECU.

 

you might have the wrong plug plugged into the iac. iac, iat and knock all have the same plug and can be plugged into each other.

 

Do you happen to know which one goes to each? The color of the wires or are they all the same color? This has been bugging me for the past few weeks now

Thanks

 

how did you get the base tranny onto the sh block... I was under the impression that it bolt up...

 

umm, what's the difference between an "sh" motor and the "base" motor?

 

unfortunately i don't know the wire colors. i'm guessing you have the iat in the right place because you're not getting that cel. so just make sure the plug you have plugged into the iac has 2 wires not only 1.

 

Nothing different, it just bolts right up

 

There is nothing different between the both. The only thing different is that the oil filter sits up higher on the SH and the trannies are different. They are both H22a4 motors