Socketed and Chipped ECU FS
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 162
Likes: 0
From: Green Bay, WI
Socketed and Chipped ECU FS
I have a socketed and chipped P75 ECU from a 5-speed 94 Teg for sale. It currently has a basemap for my H23 build on it, so you'd have to burn a new map on the chip to run any other engine. I'm asking 80+ shipping for it. Every site I've been to selling these so far is 150 for the notec ECU not including shipping so don't waste my time w/ lowball offers. If you need a socketed and chipped ECU for a VTEC engine, you can buy the vtec conversion kit from Moates for 16-20$ and save yourself a bit of money compared to buying a P28 or other factory VTEC ecu.
http://www.moates.net/product_info.php?products_id=149
Anyway here's some pics. If you have any questions my cell is 920-544-3795 or you can post them here.
I also have a OBD0 PM6 ecu (40$+ shipping) as well as a OBD1 P14 ECU (40$ + shipping) for an H23.
If any vouches are needed, just look around for my SN on D-Series as I usually buy and sell stuff there.
http://www.moates.net/product_info.php?products_id=149
Anyway here's some pics. If you have any questions my cell is 920-544-3795 or you can post them here.
I also have a OBD0 PM6 ecu (40$+ shipping) as well as a OBD1 P14 ECU (40$ + shipping) for an H23.
If any vouches are needed, just look around for my SN on D-Series as I usually buy and sell stuff there.
Last edited by boostdeliquent; Jul 4, 2009 at 09:35 AM.
Thread
Thread Starter
Forum
Replies
Last Post
