FS: 96 Hatch RACE SHELL
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 1,301
Likes: 0
From: ATL or S Florida, GA/FL, usa
FS: 96 Hatch RACE SHELL
OK GUYS here it goes.
This is a proyect that is not going to be finished so the shell is for sale.
It is a 96 with purchased as a stolen reovery NOT CRASHED; however, it came with a CD tittle. here is the list of goodies:
Update: Willing to part out, come and get what you need! Call me @ 954-672-0220 for pricing and availability.
1-) One piece fiber glass nose w/ fast clips all around. Nose is completely fitted
2-) Fiber glas doors, fitted
3-) Aluminum dash, fitted
4-) carbon fiber hatch
5-) Steering colum fitted
6-) 6 point Cro-molly roll cage made by Mazworks in orlando, FL
PRICE$ Call if interested
NOTE: Rolling chasis, comes with stock suspension and steellies.
Other parts
1-) Hasport K series mount kit for EK
2-) Strange suspension (rear Only)
3-) Welds are also on the block. These are new and have never been ran even though on car. Price is 1500 for the set including the extended studs and the special nuts and washers for the rims. If you want them separate it is 800 for the front or rear and no studs or nuts and washers
Phone # 954-673-0220
E-M: bluebottlecrx@yahoo.com
This is a proyect that is not going to be finished so the shell is for sale.
It is a 96 with purchased as a stolen reovery NOT CRASHED; however, it came with a CD tittle. here is the list of goodies:
Update: Willing to part out, come and get what you need! Call me @ 954-672-0220 for pricing and availability.
1-) One piece fiber glass nose w/ fast clips all around. Nose is completely fitted
2-) Fiber glas doors, fitted
3-) Aluminum dash, fitted
4-) carbon fiber hatch
5-) Steering colum fitted
6-) 6 point Cro-molly roll cage made by Mazworks in orlando, FL
PRICE$ Call if interested
NOTE: Rolling chasis, comes with stock suspension and steellies.
Other parts
1-) Hasport K series mount kit for EK
2-) Strange suspension (rear Only)
3-) Welds are also on the block. These are new and have never been ran even though on car. Price is 1500 for the set including the extended studs and the special nuts and washers for the rims. If you want them separate it is 800 for the front or rear and no studs or nuts and washers
Phone # 954-673-0220
E-M: bluebottlecrx@yahoo.com
Last edited by ef9wpb; Sep 23, 2010 at 05:50 AM. Reason: Add correction
Honda-Tech Member
Joined: Mar 2009
Posts: 218
Likes: 0
From: Florida.
Re: FS: 96 Hatch RACE SHELL
OK GUYS here it goes.
This is a proyect that is not going to be finished so the shell is for sale.
It is a 96 with clean title, the car was purchased from an old lady with 60k miles and then it was stripped down. here is the list of goodies:
1-) One piece fiber glass nose w/ fast clips all around. Nose is completely fitted
2-) Fiber glas doors, fitted
3-) Aluminum dash, fitted
4-) carbon fiber hatch
5-) Steering colum fitted
6-) 6 point Cro-molly roll cage made by Mazworks in orlando, FL
NOTE: Rolling chasis, comes with stock suspension and steellies.
Other parts
1-) K series mount kit for EK
2-) Strange suspension (rear Only)
Phone # 954-673-0220
E-M: bluebottlecrx@yahoo.com
This is a proyect that is not going to be finished so the shell is for sale.
It is a 96 with clean title, the car was purchased from an old lady with 60k miles and then it was stripped down. here is the list of goodies:
1-) One piece fiber glass nose w/ fast clips all around. Nose is completely fitted
2-) Fiber glas doors, fitted
3-) Aluminum dash, fitted
4-) carbon fiber hatch
5-) Steering colum fitted
6-) 6 point Cro-molly roll cage made by Mazworks in orlando, FL
NOTE: Rolling chasis, comes with stock suspension and steellies.
Other parts
1-) K series mount kit for EK
2-) Strange suspension (rear Only)
Phone # 954-673-0220
E-M: bluebottlecrx@yahoo.com
please PM price, My Kseries would look sweet with that shell!
Honda-Tech Member
Joined: Jul 2003
Posts: 696
Likes: 0
From: Clearwater, FL, US
Re: FS: 96 Hatch RACE SHELL
pics of how the front end is attached?
the rear floor is intact?
underdash harness is unmodified?
is the car located in atl or s fla?
will you deliver to tampa area?
very interested depending on price with k series mounts...
the rear floor is intact?
underdash harness is unmodified?
is the car located in atl or s fla?
will you deliver to tampa area?
very interested depending on price with k series mounts...
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 1,301
Likes: 0
From: ATL or S Florida, GA/FL, usa
Re: FS: 96 Hatch RACE SHELL
Thanks for the inquiry.
Wiere wise the car is intact. The underdash harness is intact. In fact all the chasis harness is intact.
Part of the truck floor was cut as well all the INNER SIDE material around the rear half of the car. Everything was made with a plasma cutter and right above the spot welds so chasis integrity in unharmed.
Shipping, off course I can arrange for shipping but it will be on your dime...
If you want the mounts, we can work something out but no crackhead prices.
Wiere wise the car is intact. The underdash harness is intact. In fact all the chasis harness is intact.
Part of the truck floor was cut as well all the INNER SIDE material around the rear half of the car. Everything was made with a plasma cutter and right above the spot welds so chasis integrity in unharmed.
Shipping, off course I can arrange for shipping but it will be on your dime...
If you want the mounts, we can work something out but no crackhead prices.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 1,301
Likes: 0
From: ATL or S Florida, GA/FL, usa
Re: FS: 96 Hatch RACE SHELL
How the front end is atached?
As I said, the front nose hast fast clips all around. Fitment is flawless as all the work mas made at Mazworks.
As I said, the front nose hast fast clips all around. Fitment is flawless as all the work mas made at Mazworks.
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 1,301
Likes: 0
From: ATL or S Florida, GA/FL, usa
