3' Custom Mandrel Bent w/Cutout for DC/Integra Turbo Exhaust
Thread Starter
Honda-Tech Member
Joined: May 2006
Posts: 316
Likes: 0
From: Daly City, CA, USA
3' Custom Mandrel Bent w/Cutout for DC/Integra Turbo Exhaust
taking best offer on this.
this was put together by golden auto muffler in SF (thanks mike wong)
originally I did as 1pc for no exhaust leaks
the i decided to uncork it with a custom manual cut out.
( i have a e-cut for sale also, brand new missing button though)
muffler is a 3 inch twinloop OBX muffler.
if you don't get flanges done, to install you would need to drop the rear lower control arm.
no resonator. surprisingly quiet with cut on or off.
here's pictures:
off my car
on my car
w/ cut on:
w/ cut off:
this was put together by golden auto muffler in SF (thanks mike wong)
originally I did as 1pc for no exhaust leaks
the i decided to uncork it with a custom manual cut out.
( i have a e-cut for sale also, brand new missing button though)
muffler is a 3 inch twinloop OBX muffler.
if you don't get flanges done, to install you would need to drop the rear lower control arm.
no resonator. surprisingly quiet with cut on or off.
here's pictures:
off my car
on my car
w/ cut on:
w/ cut off:
Last edited by DPRCivicSedan; Jun 8, 2009 at 09:30 PM. Reason: change title
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Thread
Thread Starter
Forum
Replies
Last Post
