yeah i got a set of 92-95 four door rear discs that i wanted to know if they would fit on my '88 civic dx, i also have both lower control arms too. has anyone done this? will they fit?

 

Of course they fit, just use the rear trailing arms from the EG donor and retain all of your own factory arms (LCA, UCA, Rear Toe Adjuster).

 

okay, i just wanna make sure i hear ya right, i will use my existing (lca, uca, and rear toe adjuster from my hatch? well cool thanks!

 

You are correct good sir .

 

cool thanks

 

wait, didn't the EX 4doors come with a sway bar? you say you have the lca's. do the lca's look like they have a extra hole for a sway bar? if they do, id say use the lca's from the EX. that way later on you'll have a mounting point for a sway bar (at least a stock mounting one)

 

If you do that, wouldn't you have a slightly longer LCA then changing the overall geometry? Or is that only for the DA Integra LCAs?

 

Da's will, not sure about EG's but I wouldn't want to mess with it. Might as well go with 90-91 Si rear LCAs.