extras around the shop for sale
Thread Starter
Honda-Tech Member
iTrader: (4)
Joined: Nov 2006
Posts: 2,195
Likes: 0
From: bristol, ct, usa
you can contact me on aim at bluhatch95.
first up is a set of HAsport B/EF swap lingakei had bought a new set for my car because my old set wasted the bushings and then i wasted a second set so i made my own set of solid bushings and i am running them no on my set up and it shift easy and firm.
150 both arms with installed new alum bushings.
i will take pics tommrow on them
LS cable tranny with EF/B swap mount. mint no grinds or pop out i been drive in on it for over a year. and just went 13.1 at 108 on it. only reason for removing it is to put in my built motor and gsr tranny. 350$

home made turbo manifold for a SOHC 00 civic CX manifold cut the cat off and welded a T3 flang on to it also comes with IHI warnerishi turbo and downpipe flang. no shaft play.
200$
obd0 B16 intake manifold 75$ obo
obd0 LS intake manifold 75$ obo
d16z6 intake manifold with all sensors injectors ect 100$ obo
all 3 stock EG sohc mount 50$
d16z6 bolck .20 block and main caps only 75$
1993 Dx tranny stock 110k 150$

1995 CX tranny 40k 200$
JDM EG heater contorl 130$

CT20A supra turbos 2 of them looks to be in good shape i also have the manifold and cast down pipe elbow if wanted 200$
1995 civic EX coupe door pannels black with tweeters no switched 75$

powdercoated LS b18A valvecover in black 50$

powdercoated accord vtec sohc valvecover in black 50$

uncut 1990 crx SI motor harness with resistor box 100$

brand new delsol dohc vtec dizzy175 obo

all price do not include shipping buyer pays for all shipping cost or pickup if welcome.
first up is a set of HAsport B/EF swap lingakei had bought a new set for my car because my old set wasted the bushings and then i wasted a second set so i made my own set of solid bushings and i am running them no on my set up and it shift easy and firm.
150 both arms with installed new alum bushings.
i will take pics tommrow on them
LS cable tranny with EF/B swap mount. mint no grinds or pop out i been drive in on it for over a year. and just went 13.1 at 108 on it. only reason for removing it is to put in my built motor and gsr tranny. 350$

home made turbo manifold for a SOHC 00 civic CX manifold cut the cat off and welded a T3 flang on to it also comes with IHI warnerishi turbo and downpipe flang. no shaft play.
200$
obd0 B16 intake manifold 75$ obo
obd0 LS intake manifold 75$ obo
d16z6 intake manifold with all sensors injectors ect 100$ obo
all 3 stock EG sohc mount 50$
d16z6 bolck .20 block and main caps only 75$
1993 Dx tranny stock 110k 150$

1995 CX tranny 40k 200$
JDM EG heater contorl 130$

CT20A supra turbos 2 of them looks to be in good shape i also have the manifold and cast down pipe elbow if wanted 200$
1995 civic EX coupe door pannels black with tweeters no switched 75$

powdercoated LS b18A valvecover in black 50$

powdercoated accord vtec sohc valvecover in black 50$

uncut 1990 crx SI motor harness with resistor box 100$

brand new delsol dohc vtec dizzy175 obo

all price do not include shipping buyer pays for all shipping cost or pickup if welcome.
Trending Topics
you got any vouches? cause your sure did flake on buying my rods i waited over a week for the money order you never sent...then you didnt even have the decentcy to write back.
Thread
Thread Starter
Forum
Replies
Last Post
OUTKAST_R
Classifieds: Forced Induction
1
Apr 24, 2004 09:30 PM




