Brought my CRX to the track. just a little budget build i put together, nothing crazy. Drag radials 1.90 60 fts, 97mph 1/8 mile, on low boost.
-LS/Vtec w/ stock internals
-Type-R TB
-Blox Intake manifold
-CTR Cams
-Supertech valvesprings/retainers
-ARP rod bolts
-Supertech block guard
-99 Civic SI trans
-cheap turbo manifold
-57mm T3/T4 turbo .63A/R
-2.5" downpipe
-26x9.0x3.0 intercooler
-OBX diff
-stock axles
-Hoosier drag radials
-ACT Xtreme press. plate
-Clutchnet 3 puck disk
-custom traction bar set-up
-Q1a coil springs
-stock fr. struts
-used Tokico rear struts

http://www.youtube.com/watch?v=sMEA5s6U4Gw

http://farm4.static.flickr.com/3345/...841d52.jpg?v=0

 

nice, how many hP u mak?

 

Dont know. never dynoed the car.

 

nice runs. do you know what it weighs??

 

Very nice.

What kind of dr's are you on and size? sorry if its posted somewhere I didn't see it...

- Anthony

 

nice!!

 

Nice runs, what are you tuned on? And were you dumping the clutch off the line?

 

I trapped 97mph @ Piedmont on a 22" 8 year old pair of slicks 3 years or so ago. That was on 10psi from a drag turbo kit (54trim). The announcer that day was pretty excited about my runs and was trying to get me to run a supercharged Z06, was even going to put up some money on it I think. I didnt want any part of that car on that particular day.

Its good to see more cars in the NC area going to the track and running. I should be down at Rockingham or Piedmont hopefully within the next month or so. Trying to finish up my budget build.

Maybe we can run each other

 

About 2150 I think. will weigh it next time i am at the track. going to Piedmont on Thurs Night.

Hoosiers 225/50-16

Hondata S300 & I Dropped the clutch at 6000RPM

 

yeah let me know when you have it ready. I am down to race for sure. See you at the track.

 

was the torque steer that bad in the 1/8th mile clip or did you jerk the wheel lol that car yanked hard to the right . good traps for low boost, this is what i just came up with by using the horsepower calculator just guessing your cars weight though ( i entered 2250 lbs )

1/4 mile time:
Trap Speed:
Weight of vehicle
with driver (pounds):


Horsepower @ flywheel = 280.40 HP

 

Nice mph and et for a simple setup. What cheap manifold you running(ebay)? Any pics of the engine bay? Time to aim higher now,.........130mph!

 

damn u 60'd the hell out that bubblle lol

 

Hey what's up kese, remember me.
yeah, I ordered $1350 in parts from you're punk *** a while back, and only got $91.77 worth in parts. where is my $1258.23 at? ooh wait my pistons are still being made and the rods still have not come in yet.

If i remember right i even tried to settle for $1000 with James and he said you were not answering you're calls. hell i even called and called till you quit taking my calls.

It's been a couple of year's so I expect to not get anything out of posting this except to let everyone on HT know who you are and what kind of person you are.

Of course if you want to settle you're debt you know how much you owe me.

I knew you would turn up someday, ****ing thief.

 

Damnnnnnn !

 

pretty quick for a budget build...Very nice!

 

Dude you gotta clear this one up for me. If you did not get what you ordered all you had to do was dispute the claim with you credit card company. They would have hit me with a charge back and you would have gotten your money back. This is not the hood dude, the are easy ways to solve a "problem" such as the one you say you had. I really dont know who you are, and I have not been hidden or anything like that. I have been racing an attending events at englishtown since i closed the shop in 2005. So if you were looking for me i should not of been hard to find. By the way if you suffered from the loss of my shop i appoligize. I lost the shop after it was burglarized by one of you ghetto *** fools(prob one of my customers) I lost over 85k combined in 3 separate breakins. The business failed after those losses. It happens. Watch the news, do some research. Business takes major loss, business closes, some cutomers get screwed. I did not do anything to you intentionally. dude. dont go and blast my name like that, its not cool. I have worked hard as hell to get where I am now(rebound after loosing my shop). Worked mad long and mad hard. If I was a theif like you say i am- the "Good Lord" would not of blessed me like he has. If I was a theif like you say I am i would reap what i sow. its not your place to try and down me, Drop the anger and hate, you will be rewarded for it. Read a bible and calm the heck down dude. Please private message me and we can possibly clear this up.

 

Part torque steer and part poor alignment. stiffened up the mounts and did an alignment after those 1/8th mile passes and you can see it went nice and straight at Rockingham.

GodSpeed project manifold. yeah I'll be turning the boost up and trying to hit 130+MPH.

engine bay pics

 

Yeah Rob, You know how i do I was racing one of the owners of Phantasm Motorsports( NC Shop). They were hosting the event. I made sure to line up against him. I knew that i had to cut a good light in order to beat that car. Same size turbo 20psi boost and slicks. Me 8psi and drag radials. I went 12.0@120 to his 11.3@122. I love drag racing.

 

is that 8 psi, and spray?

 

I think I believe this guy... hmmmm he knew your name and employees names.

 

How long have you had that turbo manifold? Hows the quality?

 

i have had it for a few years now. quality is the best i've seen for this type of manifold. no cracking or problems so far. but then again i only drive this car on the track.

 

I am not going ***** up this thread too much. Lets see what kese has to say in PM's

by the way kese i am in Colorado and never lived anywhere near you or you're shop.

i called in the order to you directly.

 

Yeah, what's with the nitrous setup in the second shot?