k so the thing is i just got done doing a swap in my hatch. took out the obd2 engine. automatic btw, and put in a manual teg LS swap. converted the dizzy, alty, and the injector harness's. i went to try and turn it over but it wonnt start, the engine is getting fuel and when i checked for spark it had that the i could see. i took the plug out and plugged it in into the spark pkug wire and it made a spark when i set it to my windshield sos that i could see if it had spark. i noticed that it had spark, but it didnt spark by the plug, instead it made s[ark bgy my winshield wiper. i have the jumper harness for the ecu and everything else is all good. i just knoiw that i am missing something cuz it didnt start. i could really yuse the help.

 

ok, so i takle it none of you know n e thing about swaps. thanks n e ways.

 

this swap is lkilling me. i dont know what the hell to do. is there anyone who knows bout this swap that i am soing? really need the help.

 

so...from the info given, you are running an OBD1 ecu and motor? First, make sure all your GROUND wire is connected....one at the tranny, one on the thermostat and of course, the one at the valve cover.