Needing a few turbo parts: WTB
Thread Starter
Honda-Tech Member
Joined: Feb 2009
Posts: 1,100
Likes: 0
Needing a few turbo parts: WTB
I need a few parts to finish my setup.
Not looking to spend a ton, as i'm not looking at doing more than 350-400 whp.
With that said, heres the list of stuff I need
=550cc Injectors SATURATED
=B Series A/C FRIENDLY 3 inch downpipe
I will not give up my a/c. Please do not post anything that is not a/c friendly.
=NEW walbro 255 fuel pump for dc integra
=Oil Feed lines/Return lines for turbo.
=Stage 2.9 Axles NEW
=Hasport Motor Mounts for a teg
=B18a/LS Low Compression Pistons
=B18a/LS Turbo Valves, Dual Valve Springs, and Retainers
Not looking to spend a ton, as i'm not looking at doing more than 350-400 whp.
With that said, heres the list of stuff I need
=550cc Injectors SATURATED
=B Series A/C FRIENDLY 3 inch downpipe
I will not give up my a/c. Please do not post anything that is not a/c friendly.
=NEW walbro 255 fuel pump for dc integra
=Oil Feed lines/Return lines for turbo.
=Stage 2.9 Axles NEW
=Hasport Motor Mounts for a teg
=B18a/LS Low Compression Pistons
=B18a/LS Turbo Valves, Dual Valve Springs, and Retainers
Last edited by KdF; May 18, 2009 at 07:30 PM. Reason: Updated
Honda-Tech Member
Joined: Feb 2009
Posts: 174
Likes: 0
From: somewhere in NC
Re: Needing a few turbo parts: WTB
i got 3an feed line/flange/gasket and 10an return line/flange/gasket for t3/t4 turbo... flanges/gaskets are from Function 7... 10an fitting/return line from Summit Racing...offer me a price..
note: these are new/never been used....
note: these are new/never been used....
Trending Topics
Honda-Tech Member
Joined: Sep 2004
Posts: 613
Likes: 0
From: chicago burbs, IL, USA
Man U FTW
Joined: Sep 2005
Posts: 11,973
Likes: 2
From: Phoenix, AZ
Re: Needing a few turbo parts: WTB
I have a Walbro pump for sale as well as a set of pistons/rods...check it out
http://www.hondamarketplace.com/show....php?t=2559686
http://www.hondamarketplace.com/show....php?t=2559686
Junior Member
Joined: Apr 2007
Posts: 238
Likes: 0
From: Citie, AF, Budapest
Re: Needing a few turbo parts: WTB
I have a 3" AC downpipe that was on my DC. Also I have some RC 750cc injectors that are saturated. I used them for about 200 miles and then returned the car to stock since I am going back to school. I made 400 whp with the 750's and had a little bit of room to grow.
400 whp will push the limits of 550's from what I hear. LMK I can get pics tonight.
400 whp will push the limits of 550's from what I hear. LMK I can get pics tonight.
Junior Member
Joined: Oct 2006
Posts: 12
Likes: 0
From: Brooklyn, Ny
Re: Needing a few turbo parts: WTB
i have an ac compatible inline pro stainless steel turbo manifold fabricated for a 44mm wastegate i'm asking for $250 no downpipe available i'm not on here much so u can email me @ abovestatusqu0@vzw.blackberry.net if interested i have no clue how 2 post pics but if u send me your email address ill send u a pic of it
Re: Needing a few turbo parts: WTB
i have a full race a/c friendly manifold, no down pipe
here is my thread
http://hondamarketplace.com/showthread.php?t=2568062
here is my thread
http://hondamarketplace.com/showthread.php?t=2568062