Everything is sold. Thanks for looking.

I have for sale a B18C1 cylinder head that I am parting out that was ported by Ed's Racing Heads for forced induction. The port work was done for another racer on here. He used the head for about 3,000 miles before it was discovered that one of the cam caps was overtightened. The #5 cam cap on the exhaust side has some galling where the cam grabbed the aluminum in the journal. Also, one of the smaller bolts (6mm, 10mm head) broke off in the casting. There have been some minor attempts at extracting the broken bolt, and at this point that bolt hole would have to be opened up to the next size (8mm, same as the proper cam cap bolts). This bolt is at the very end of the head where the cam seal goes in, so not critical at all for torquing the cam caps.

I am parting out the head and have the following for sale:

B18C1 cylinder head, ported for forced induction by Ed's Racing Heads. Bare head with all the cam caps, oil spray bars, bolts, etc... Valve seats and ports are modified for .5mm oversize intake and 1mm oversize exhaust valves. Also includes new Ferrea valves guides installed when head was ported and fully rebuilt (3,000 miles ago). Has the above mentioned damage - $250 plus shipping.

**Edit** Now that I look closer, this head would need a line bore of both cam journals and the repair of the broken bolt to be fully usable again. I've dropped the price. If no one buys, I'll consider parting out the good parts. Stuff like the LMAs I would let all 8 of them go for $50 plus shipping. I don't know if they are ITR or just plain GSR. The complete rocker arm assemblies with rocker shafts for $75 plus shipping. The oil spray bars and bolts for $40 plus shipping.
















































Ferrea valve springs and Ti retainers. Complete set of 16. $250 plus shipping.








Ferrea .5mm oversize intake valves and 1mm oversize exhaust valves. Complete set of 16. $150 plus shipping.












[SOLD] ITR valve cover, intact (not cut) and Password JDM carbon fiber spark plug cover. $100. [SOLD]










JDM Vtec solenoid. Needs a new seal between solenoid and valve body, and the pressure switch. $25 plus shipping.

I accept Paypal, and shipping is from Blaine, Wa 98230. I'll be posting up pictures later tonight.

 

Pics are up as promised.

 

Bump!

 

Bump #2!

 

Bump again.

 

Damn. I want that valvecover. It will fit a gsr right? Pm'ed!

 

Valve cover/spark plug cover sold. The rest is still up for grabs.