FS(Buf, NY): B18C1 Bottom end w/ 75k
Thread Starter
Honda-Tech Member
Joined: May 2008
Posts: 897
Likes: 0
From: NY
FS(Buf, NY): B18C1 Bottom end w/ 75k
comes with oil pan, crank, pistons, rods, crank pulley, alternator, drivers side motor mount, dipstick
has 75k on it, clyinder walls need to be honed, and it could use a good cleaning on the outside
everything is full assembled
i started dissambling everything (kinda), and i rotated the crank and there is no rust whatso ever below about an inch of 1 & 4, and 2&3 have none at all
i would still get the walls honed tho
it has full oil, and it's not milky whatsoever, i also pulled apart the t-stat housing and the oring was perfect, tstat looked good(but i threw it out), and the coolant was perfectly green
LOOKING FOR 500$ OBO
Located in 14227
has 75k on it, clyinder walls need to be honed, and it could use a good cleaning on the outside
everything is full assembled
i started dissambling everything (kinda), and i rotated the crank and there is no rust whatso ever below about an inch of 1 & 4, and 2&3 have none at all
i would still get the walls honed tho
it has full oil, and it's not milky whatsoever, i also pulled apart the t-stat housing and the oring was perfect, tstat looked good(but i threw it out), and the coolant was perfectly green
LOOKING FOR 500$ OBO
Located in 14227
Last edited by 95LS1t; Apr 23, 2009 at 04:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post