Parting out...B18C1 block and head, B16A2 longblock, itr rods/pistons, BC valve train
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Parting out...B16A2 head, H22A4 head, ITR rods/pistons, ITR valve train, ITR cams
I was keeping this stuff for my all motor build as well as just to have in case I needed it. I have decided to sell everything I have, and just buy a complete itr swap. I am hoping that by selling all of this stuff as well as some other things I have laying around I could do such a thing. Here is what I have off of the top of my head. Prices are negotiable to a point, but as we know everyone has their price.
GSR shortblock (oem) - Sold!
GSR head (oem with bent valves on cyl. 4, not off of the shortblock listed above) - Sold!
B16A2 shortblock (oem) - Sold!
B16A2 head (oem) - $400
'97 spec ITR cams - $300
ITR dual valve springs, valves, and retainers (oem) - $300
ITR intake manifold and TB (oem) - Both Sold!
JDM ITR rods, pistons, rings and bearings - $300
Buddy Club dual valve springs and ti retainers - Sold!
Buddy Club Spec 4 cams - $300
H22A4 head (oem with bent valves) - $125
I have some other things as well, but that is the majority of it. Feel free to PM me with any questions. Pics will be up soon. Thanks for looking!
GSR shortblock (oem) - Sold!
GSR head (oem with bent valves on cyl. 4, not off of the shortblock listed above) - Sold!
B16A2 shortblock (oem) - Sold!
B16A2 head (oem) - $400
'97 spec ITR cams - $300
ITR dual valve springs, valves, and retainers (oem) - $300
ITR intake manifold and TB (oem) - Both Sold!
JDM ITR rods, pistons, rings and bearings - $300
Buddy Club dual valve springs and ti retainers - Sold!
Buddy Club Spec 4 cams - $300
H22A4 head (oem with bent valves) - $125
I have some other things as well, but that is the majority of it. Feel free to PM me with any questions. Pics will be up soon. Thanks for looking!
Last edited by weavertime1; May 27, 2009 at 03:37 AM. Reason: Sold items
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Re: Parting out...B18C1 block and head, B16A2 longblock, itr rods/pistons, BC valve t
I am guessing you mean the ITR cams, valve springs and retainers Axemurderer23?
A little note to those wanting parts...I am a very busy person, and I do the best I can to be fair to those who want parts. With most of these larger engine parts and such, I would rather not ship them. Chances are if you are fairly local you will get first dibs on things. With that being said, don't expect me to hold stuff for weeks just because you are local. Here is a list of things that are pending:
- ITR cams, valve springs, retainers to Axemurderer23
- one of the B series heads (not sure which one yet) and the buddly club cams, valve springs, and retainers to egturbolsvtec if he is willing to meet me in Clarks Summit.
- As far as I know everything else is still available. I am sorry if you think you had first dibs and such, but to be honest until the money is in my posession, pretty much anything goes. Too many people on H-T and just in the honda world in general say they want something, and then you never see/hear from them again. Thank you for understanding!
A little note to those wanting parts...I am a very busy person, and I do the best I can to be fair to those who want parts. With most of these larger engine parts and such, I would rather not ship them. Chances are if you are fairly local you will get first dibs on things. With that being said, don't expect me to hold stuff for weeks just because you are local. Here is a list of things that are pending:
- ITR cams, valve springs, retainers to Axemurderer23
- one of the B series heads (not sure which one yet) and the buddly club cams, valve springs, and retainers to egturbolsvtec if he is willing to meet me in Clarks Summit.
- As far as I know everything else is still available. I am sorry if you think you had first dibs and such, but to be honest until the money is in my posession, pretty much anything goes. Too many people on H-T and just in the honda world in general say they want something, and then you never see/hear from them again. Thank you for understanding!
Honda-Tech Member
Joined: Mar 2009
Posts: 55
Likes: 0
Re: Parting out...B18C1 block and head, B16A2 longblock, itr rods/pistons, BC valve t
interested in eiter b16 block or gsr block . not sure and would u be interested in parting those injectors on that itr manifold?? i am willing to travel and may have some parts ur interested in?
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Feb 2007
Posts: 2,782
Likes: 3
From: Athens, Pa
Re: Parting out...B18C1 block and head, B16A2 longblock, itr rods/pistons, BC valve t
I might be willing to part the injectors. What parts do you have? Thanks!
-Clay
-Clay
