Integra Part-Out
THREAD HAS BEEN UPDATED CHECK OUT LAST PAGE!!!!
NEW PRICES!!!
-The LONG BLOCK if anybody wants will be $1200 firm! ITs freshly rebuilt with less than 5,000 miles.
What the Long Block has been done to:
Legit Block Done by Glenn @ Dave Hiatts Machine
-OS 81.5mm PR3 pistons from RS_Machine ($160) Compression yields @ a great drivable street car 11.6-11.8 cr . Not high as CTRs because they will yield more than 13+ and not a good idea to run pump gas.
-ARP Head Stud ($120)
-ARP Rod Bolts ($63)
-Shot-peened GSR Rods
-Complete Hot-tanked and bored cylinder to fit Pistons ($476 labor)
-ACL Bearings
Legit GSR Head
-3 angle Valve Job
-Glass Beaded the Stock Valves
-SuperTech Dual Valve Springs ($150)
-Stock Retainers
-Thoroughly Cleaned and Hot-tanked by Dave Hiatts Machine ($236)
-B18C1 Hydro Transmission will be $350 (slightly grind 5th) if you shift right it will never grind!
-AEM Cam Gears $80 with almost new Cam seals
-Axles $80 pretty much new, I got it new when I decided to get new axles out of nowhere because I wanted everything fresh on the car.
-Innovative Stage2 Billet Motor Mounts $200 scratches from installation but practically new, no torn bushing!!!!Holds your motor better than you can hold you lady...lol...so stiff it will get you jealous!!! But BEWARE!!!it will shake your car and any loose bolts will loosen up so be aware only big boys can play!
-Exedy Stage 1 Organic Clutch less than 5k miles..Hardly driven rough on it and broken in properly. $175,
-GSR Skunk 2 IM 120
- Bored out 64mm TB $100
-Slightly used Hondata IM gasket SOLD
- B-series Hydro shift linkage $100
-Stock Virgin P72 ECU $100
-OBD1 GSR distributor SOLD
-Fresh rebuilt OBD1 GSR alternator $60
-ACT Flywheel used $OLD
-ITR Calipers $125
-Rear Hatch with Rear Window $50
-Both Rear side Windows for $25 (come by and take it off, I need it gone by this week)
-Integra Headliner $30
-98+ Pass. Headlight $25
-D series Throttle Cable $10
NEW PRICES!!!
-The LONG BLOCK if anybody wants will be $1200 firm! ITs freshly rebuilt with less than 5,000 miles.
What the Long Block has been done to:
Legit Block Done by Glenn @ Dave Hiatts Machine
-OS 81.5mm PR3 pistons from RS_Machine ($160) Compression yields @ a great drivable street car 11.6-11.8 cr . Not high as CTRs because they will yield more than 13+ and not a good idea to run pump gas.
-ARP Head Stud ($120)
-ARP Rod Bolts ($63)
-Shot-peened GSR Rods
-Complete Hot-tanked and bored cylinder to fit Pistons ($476 labor)
-ACL Bearings
Legit GSR Head
-3 angle Valve Job
-Glass Beaded the Stock Valves
-SuperTech Dual Valve Springs ($150)
-Stock Retainers
-Thoroughly Cleaned and Hot-tanked by Dave Hiatts Machine ($236)
-B18C1 Hydro Transmission will be $350 (slightly grind 5th) if you shift right it will never grind!
-AEM Cam Gears $80 with almost new Cam seals
-Axles $80 pretty much new, I got it new when I decided to get new axles out of nowhere because I wanted everything fresh on the car.
-Innovative Stage2 Billet Motor Mounts $200 scratches from installation but practically new, no torn bushing!!!!Holds your motor better than you can hold you lady...lol...so stiff it will get you jealous!!! But BEWARE!!!it will shake your car and any loose bolts will loosen up so be aware only big boys can play!
-Exedy Stage 1 Organic Clutch less than 5k miles..Hardly driven rough on it and broken in properly. $175,
-GSR Skunk 2 IM 120
- Bored out 64mm TB $100
-Slightly used Hondata IM gasket SOLD
- B-series Hydro shift linkage $100
-Stock Virgin P72 ECU $100
-OBD1 GSR distributor SOLD
-Fresh rebuilt OBD1 GSR alternator $60
-ACT Flywheel used $OLD
-ITR Calipers $125
-Rear Hatch with Rear Window $50
-Both Rear side Windows for $25 (come by and take it off, I need it gone by this week)
-Integra Headliner $30
-98+ Pass. Headlight $25
-D series Throttle Cable $10
Last edited by 2slowGs-R; Jul 26, 2009 at 12:17 PM. Reason: update
Trending Topics
Im on the verge of selling the rear seat belts for 25+plus shipping, i will only have the frons left unless the guy flakes. I will have everything packaged up by tomorrow. lmk, I would like 25+shipping and add 3% for paypal fee. thanks. Txt me your zipcode stating the front seat belts so I know, also a name, and state you are from hondatech.
yes i do. I use to have ac to but i took out the ac compressor but i have everything under the hood. If you want, best thing to do is drop by in fresno to check it out. call me and let me know though.
I'd like 50 bucks + shipping and 3% paypal fee. Sorry bro. Im cash low..haha....CALL ME GUYS. ITS SO MUCH EASIER!!!!!!I can do it better..I try to check these as best as i can but Im pretty busy too so you guys who call first will get first diggs.Just do flake like those of many..haha...
Alright guys who want me to part it out.
-Whole engine with harness, transmission, head, block, stock p72 ECU, Exedy Clutch Stage 1 Kit, shift linkage with GSR shift ****, half shaft(no axles) ( No IM, Header, mounts, TB) JUst the motor with distributor, starter, alternator for 2800
-Tri-Y Header SOLD to JT
-Innovative Motor Mounts $200 (bought for $289)
-Edelbrock Intake Manifold SOLD
-Professional Product 68mm TB for $100 bought for ($145)
-Walboro 255 lph HP Fuel Pump less than 100 miles $75 (bought for $99)
-Axles in perfect condition Drive side and Passenger for $80
-Whole engine with harness, transmission, head, block, stock p72 ECU, Exedy Clutch Stage 1 Kit, shift linkage with GSR shift ****, half shaft(no axles) ( No IM, Header, mounts, TB) JUst the motor with distributor, starter, alternator for 2800
-Tri-Y Header SOLD to JT
-Innovative Motor Mounts $200 (bought for $289)
-Edelbrock Intake Manifold SOLD
-Professional Product 68mm TB for $100 bought for ($145)
-Walboro 255 lph HP Fuel Pump less than 100 miles $75 (bought for $99)
-Axles in perfect condition Drive side and Passenger for $80
Last edited by 2slowGs-R; Jul 26, 2009 at 12:18 PM.



PM me your location and phone number, thanks!