edit: i kept the head w/bent valves and went after market...the swap is now offered w/perfect head...ready to bolt up and run...

its an h22a1 from my prelude. it comes w/head, intake manifold, assembled block, ecu, and wireing harness. before i took it out compression test showed 225 psi accross the board.
edit:i also have an extra alt., shifter linkage and many misc parts

make an offer offer

also for sale:

jdm longer geared tranny

wiseco 90mm 12:1 compression w/rings, brand new-deal fell though still avail.

je 87 mm 10:1 w/je rings-brand new

hondasaver duel valve springs

eathier a type-s header or a dc sport mated to an oversized downpipe, not sure which one i want to keep yet

make offers

i need to sell this stuff soon, so make an offer and ill let you know what i think
vsilvestri@msn.com


[Modified by 93ludevtec, 8:24 AM 8/15/2002]


[Modified by 93ludevtec, 8:25 AM 8/15/2002]


[Modified by 93ludevtec, 7:07 PM 8/20/2002]


[Modified by 93ludevtec, 5:09 PM 9/16/2002]


[Modified by 93ludevtec, 5:11 PM 9/16/2002]


[Modified by 93ludevtec, 6:30 AM 9/25/2002]


[Modified by 93ludevtec, 9:25 PM 10/3/2002]


[Modified by fastludeh22, 3:53 PM 11/7/2002]


[Modified by fastludeh22, 8:55 AM 11/8/2002]

 

where you from and how much you want for the whole setup???

 

i live in atlanta, ga. im not sure how far away you are but id be willing to meet half way, or ship if its too far, you pay shipping. im not sure how much i want, make me a reasonable offer. and by the whole setup do you mean everything, or the whole swap?

 

just pm'd you with an offer. very serious on it. let me know.

 

how many miles on the motor??? i was asking for the whole motor and the jdm tranny...about 2000 but we could talk in IM...thanks

 

the moter had about ~75k on it and the tranny has less then that. im me now if you want cause honestly i dont know how to start an im, just reply to them.

 

still for sale

 

why are the valves bent? are all of them... or just a few?

is this a swap you're putting together from different cars?


[Modified by DOHC-DX, 6:35 PM 8/15/2002]

 

i havent removed them from the head so im not 100 percent sure, but it looks like only 5 of the exaust valves are bent, the rest look fine. they are bent from (and i feel dumb for this) a mis-shift. the swap is all from my car except the ecu and wireing harness which im getting w/my new engine here shortly.

btw-theese are both pre-96 h22's

 

damn this moves fast, ttt

 

someone wants the all-mighty h22!

 

I will buy the tranny, PM me your phone number

 

still for sale, and great prices just make an offer.

 

buy, buy,buy

 

once again, ttt

 

no reaqsonable off will be turned down, so make one

 

hey if you or someone interested in his block need. i have my stock pistons, rods, cams, and cam gear from my 96 h22 i went all aftermarket and low compression. i ll sell them for a cheap but decent price.. email me
only had 60k on them.. they are still in pefect shape.. motor just sitting in garage.. in pieces

free bump "lets work together"

i ll be in ATL for labor day


[Modified by KTeller8, 12:24 AM 8/18/2002]

 

hey send me an e-mail a few days before you are here and maybe we can hang out.

just to clear things up though, this engine comes w/ all the stock parts already so just let me know.

 

Still have the pistons and rods for sale ???

 

pistons for sure, but i think im going to keep the rods since i keep hearing good things about them. e-mail or im me

vsilvestri@msn.com

 

buy this i want my new ****, will part out some stuff

 

ttt

 

motor sold yet??? wanna take me up on my offer???

 

check your mail

 

you have an im