FS: Blown GSR Block, B17 IM & Harness, ITR Cams, Camplates, Exedy, Hasport & More!
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 1,467
Likes: 0
From: DC/MKE
FS: Blown GSR Block, ITR valvesprings, B17 IM, Cams, Camplates, Exedy, Hasport &More!
Located in Milwaukee, WI. Everything is OBO!
Blown GSR block: Sold
P61 ecu: Sold
B series shift linkage: Sold
ITR Cams: Sold
OBD-1 B series engine Harness: Sold
ITR Valve Springs: Sold
OEM B series Axles. No rips or tears on the boots. Worked perfect when removed.
$100 Prefer pickup.
Exedy oem replacement clutch. Used for about 5k. For a cable b series clutch. Was used on a 1993 YS1 GSR trans. Includes disk, pressure plate, throw out bearing, and piolet bearing. Lots of life left.
$125
Stock B17 cams. From a 1993 GSR. Good condition.
$25
B series Camplates. Complete with all bolts.
$75
Complete B17 intake manifold. Includes all sensors, fuel rail, tb, and injectors.
$150
B series valve cover. Cut for cam gears. Could use some paint.
$40
Hasport B series hydro to cable conversion mounts. Includes the three mounts and the stuff for the slave cylinder conversion on the cable trans. I'll even give you the slave cylinder. The poly on the rear mount was trimmed because it didn't fit well in the bracket. The mount is still 100% solid and you'll NEVER see it when installed.
$225
B series dowel head pin. Off a b17. Best offer.
I think that other thing is part of the vtec selinoid. I have the selinoid so it should probably stay together. I'll sell the whole selinoid if someone wants it though.
Thanks!
Blown GSR block: Sold
P61 ecu: Sold
B series shift linkage: Sold
ITR Cams: Sold
OBD-1 B series engine Harness: Sold
ITR Valve Springs: Sold
OEM B series Axles. No rips or tears on the boots. Worked perfect when removed.
$100 Prefer pickup.
Exedy oem replacement clutch. Used for about 5k. For a cable b series clutch. Was used on a 1993 YS1 GSR trans. Includes disk, pressure plate, throw out bearing, and piolet bearing. Lots of life left.
$125
Stock B17 cams. From a 1993 GSR. Good condition.
$25
B series Camplates. Complete with all bolts.
$75
Complete B17 intake manifold. Includes all sensors, fuel rail, tb, and injectors.
$150
B series valve cover. Cut for cam gears. Could use some paint.
$40
Hasport B series hydro to cable conversion mounts. Includes the three mounts and the stuff for the slave cylinder conversion on the cable trans. I'll even give you the slave cylinder. The poly on the rear mount was trimmed because it didn't fit well in the bracket. The mount is still 100% solid and you'll NEVER see it when installed.
$225
B series dowel head pin. Off a b17. Best offer.
I think that other thing is part of the vtec selinoid. I have the selinoid so it should probably stay together. I'll sell the whole selinoid if someone wants it though.
Thanks!
Last edited by stevieteg; May 5, 2009 at 08:40 AM.
Junior Member
Joined: Jun 2007
Posts: 16
Likes: 0
From: LENOIR CITY, TN, UNITED STATES
Re: FS: Blown GSR Block, B17 IM & Harness, ITR Cams, Camplates, Exedy, Hasport & More
IF you are interested in shipping the block, and are willing to work on the price a little, pm me.
for looking.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Project_EK
Northeast (Sales)
9
Jun 30, 2015 03:29 PM
red9sixhatch
Northern California (Sales)
9
Nov 25, 2012 12:34 PM
stevieteg
Mid-West (Sales)
17
Jul 7, 2009 10:38 AM