im pretty sure you can get integra front seats in a civic(2000Si), was unsure about the rears, its all gsr leather interior and my new car is gutted, dont know if it will fit or not....
What does it take to swap in the teg carpet and front and rear seats? pics would be great if anyones done this

 

the carpet wont fit right, at least in my opinion. mainly because of the different mounting holes and unibody structure. i have gsr black cloth front seats in my 97 civic ex. the rear bolt next to the center console on the integra seat rail will need to be modified. some people just dont bolt it in, but that is really dumb to do. i just cut a slot in the rail the same width as the hole and bolted it down with a big washer.

 

You can use the inner si rails on the integra seats, all 4 bolts will be used this way. Thats what I did on mine.

 

Correct. But your seat will sit at a slant since DC rails sit lower than EK rails.

 

what about the rears?

 

then why are my seats level.....
all i did was swap the inner rails and swap "bottom part" outer rails.

 

Same here, they are perfectly level. The adjustments are my favorite part.