Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.

 

Prices do not include shipping or Paypal charges unless otherwise stated. I might consider some trades, just let me know what you have to offer. More pictures upon request.


Up for sale is my 88 Honda CRX SI rolling shell clean title. Car has been family owned. This car is a head turner. Gets compliments everywhere it goes. Very few clean CRX’S left. Car has gone 10.6 @141 in the qrt. mile. My accomplishments: In 2004 at Import motion Best CRX award , BOTI Seattle 2nd place in S/C, NHRA Pomona 2nd place in SFWD. In 2005, BOTI Seattle 2nd place in S/C, NHRA Pomona semi finals in SFWD. In 2006 NHRA Pomona semi finals in SFWD. What’s all included: NHRA certified chromoly cage(this alone would cost you $1500-$2000), Moroso battery box, battery shut off switch, jdm type-r cluster, driver Sparco bucket seat, fake spoon steering wheel, Type R floor mats, Black with red stitching shift boot and e-brake boot, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a Magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, Tilton master cylinder (car has been converted to hydraulic, meaning no more crappy cable tranny problems), also Tilton slipper valve, wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. Would not take much to have a nice Street Comp car. $3300.00 OBO




CLICK ON PICTURES TO ENHANCE IMAGE











Here is some pictures of when the car was running.






Used Motec M4 with, data logging, lambda, and advanced functions unlocked. Comes with data cable, baro sensor, Honda B series distributor, o2 sensor and the motec Honda harness. For more info http://www.motec.com.au/m4/m4overview/ $2250.00 OBO




One B series starter's left $50.00 each



One B series half shaft left $75.00



Complete turbo kit made for a CRX with a B series. Could fit other cars with some modification. I made 500hp on 17lbs with a 81m block. This kit is capable of making 800hp + with high boost. Everything has less then 2000 miles on them and less then 8 times at the track. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo (72m) with 4in down pipe and -10 oil return line and -4 feed line, , 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3 ). (radiator and intake not included) $2800.00








OR

Intercooler, Tial bov, piping and clamps, couplers $1000.00




Turbo, manifold, waste gate, down pipe, dump tube, and lines, fittings $2000.00




Complete long block. Motor has very low miles only made it to the track less then 8 times this year (less then 2,000 miles). LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, oil pan has a -10 fitting for turbo return line, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. Motor has a new T-belt, tensioner, water pump, oil pump, rear main seal, B20 breather fittings on back. I made 500HP on 17lbs. This motor will have no problem making 600 to 700hp on high boost. $3300.00 OBO(Pick up only)
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210







M&W PRO-10 with harness $400.00 SHIPPED FIRM




Magnaflow Regulator $130.00 SHIPPED




G-Force Window net (date: APR. 08), G-Force Seat belt (date: AUG. 08) G-Force gloves (size: large) $140.00 SHIPPED




Gator 300M axles for Honda B series motor. 32m hubs.$800.00 SHIPPED

 

Weld Racing Aluma-star 2.0 ( now have rim screws )
* 15 x 8
* 4" back spacing
* 5 x 4.75 bolt pattern

600.00 + shipping OBO





_______________________________________



__________________________________________________ ________

1992 honda civic si racecar chassis


***asking 12,000***
(this does not include suspension/wheels/drivetrain / NO extras, besides whats listed below)
will entertain trades for "street car" type vehicles. let me know what you have

* 10pt chromoly cage with parachute mount/wheelie bar hookups_ just certified this year_
* Custom aluminum dash, door panels and interior panels
* chromoly wheelie bar with wheeleze wheels
* stroud window net
* omp race seat
* FAL lexan windows (race kit) * Lexan sunroof *
* MB Products fiberglass doors with chromoly frames and lexan window with stainless allenhead bolts/nylock nuts
* G-Force seatbelts, brand new last year (2007)
* Tube front end with midplate & solid timing belt side mount
* clearanced for 28" tires
* Acura sundance gold pearl paintjob
* entire chassis was sand/bead/media blasted before paint
* Carbon fiber front nose
* spare tire well is cut out, with flat aluminum panel covering
* CNC master cyl / cnc staging brake with line lock
* OMP steering wheel with quick release/line lock button

 

Selling race car with many extra parts. Asking $9,000-obo for the whole thing.
Chassis-1999 Honda Civic Si Chop Top
Class-All Motor
Engine-B18C1 Stroked and Deck Plate to a 2.3
Bore-86mm
Stroke-98mm
Crank-Eagle B20
Rods-Eagle
Pistons-Arias
Port Job-Port Flow
Cams-Ferrea and Roller Rockers
Valves-Rev
Throttle Body-BDL 74mm
Fuel-Methanol
Tranny-GSR
Header-Custom Burns
ECU-AEM
There are no drag rims or tires with this car. They have been sold all ready. The car is on stock wheels.
I will sell just motor for $5,000.00 with some extras
You can email me at jlopes@twcny.rr.com or on here for info.

 

Im selling my IPS spec longblock.serious buyers only
87.5x99 stock sleeve
IPS spec JE 14.5:1 compression
IPS spec Cunningham 2piece forged ultralight rods
typeS head-race port done by Dave@Headgames Motorworks
IPS k-10 cams
Supertech valve springs
Titanium retainers
Ferrea standard size valves
ERL modified s2000 oil pump
CAMS ARE SOLD FROM THIS ENGINE. EVERYTHING ELSE IS STILL ASSMEBLED AND STILL FOR SALE
here is a break down in price how much it would cost to build this same motor
2004 k24a4 block-$600
2006 tsx crank-$600
ips rods-$1100
ips k10s-$1600
titanium retainers-$160
Supertech springs-$175
Ferrea valves-$250
ERL s2000 oil pump-$450
87.5mm IPS spec JE pistons-$1537
2006 typeS head with full race port by Headgames-$2000
Inlinepro shortblock assembly-$1250
Inlinepro all motor long block assembly-$950
ACL bearings-$80
This engine made 301hp@218tq. on Jeff Evans dynopak..My car has ran 10.91@124mph weighing 2050lbs with driver.
Willing to part if i can get enough people interested in everything.
Make offer





I would like to get $2300 obo for the head and $3500 obo for the block. If you buy it together $5500


also for sale
750cc RC injectors.only used this season-SOLD
Golden Eagle Kseries Fuel Rail(black)-$100
24.5x9x13 M/T slicks 30 passes-SOLD

 

Siemens 630cc injectors new 200$ shipped hasport 88a race inserts 25$ t76 turbo came of a supra 800$ brand new long shifter handle with standered *** 10 inch version 75$

 

B18B1
golden eagle sleeved 85mm
85mm 9:1 CP pistons
eagle rods
acl bearings
head studs
main studs

PR3 head
supertech valve springs
supertech retainers
manley SS valves
GSR cams
Golden Eagle cam gears

B20 breather fittings on back
Z10 breather plug
AN fittings on oil sending hole, and oil hole on head

motor was ran NA for like 5000 miles, so its ready to go, never been boosted on

2800 obo Graig, 541 912 7069

 

A1000 aeromotive fpr p/n 13101, its new never been used, asking $125
its the one with -10 lines.

 

MUST SELL>>>>>>>>>
fully built Laskey GSR bottom end. mint condition!
-84mm cp pistons, crower rods, darton solid deck sleeves, type r oil pump, Ati dampner, 6 quart dooley racing oil pan. 3000.00 obo


fully built b16 head port and polished by port flow, includes ferrara 1 mm oversize valves. dual valve springs and titanium retainers.. head was just pulled apart and checked over 2 weeks ago.... reassembled and ready to ship . will include type r cams... 1500 obo


precision 875 hp intercooler 400.00


tial 44mm waste gate with all hardware .300.00 with shipping


One piece 3 inch intrercooler piping for EK with wiggins. 300.00 OBO




PM me for pictures .

 

sOLd....

 

Inline Pro Manifold for sale. The Manifold has been ported out for a T4 turbo. 350.00

BRAND NEW GRP aluminum rods for sale for 84mm bore. For LS/ B20 motor. 400.00

1995 GSR head stock! All caps, cams, cam gears included. All is stock out of a GSR. 350.00

Used Super Tech valves in good condition, nothing is wrong with these valves. (going k-series) 100.00

Used 65mm Edelbrock throttle body 175.00

 

Sold

 

4294 Journal Bearing Turbo

Used for one season, has a lot of life left in her. She made 45psi last season hitting boost cut (In Utah). Compressor housing is powder coated black. 1.01 AR exhaust housing. Has 10 passes (6 were license passes) and 10 dyno pulls is all.



Asking $800+ shipping

PM me or Call/text.
Jason - 801-879-4940

 

HP Racing GSR intake SOLD
Misc. fuel rails for B-series $50 a piece. SOLD
OBD2 to OBD1 jumper harness SOLD
Innovative boost controller $300 SOLD
Bogart I-10's 15X8 $300 SOLD
Z-10 oil cap breather $30 SOLD
5 Ziger wheels 15X7 5 lug.$300SOLD

85mm B20b with JE 12.5 pistons, Eagle rods, ACL bearings, Rage block gaurd. FRESH NEVER RAN $1500


AEBS custom made GSR intake NO T-body $300


Turbonetics racegate all the flanges included $100


Jun ultra lite flywheel B-serie $50


AEM fuel regs. B-series and remote mount $75 each


EG 92-92 JDM cluster $120 Great shape


Skunk2 stage 3 cams only used 1000 miles $300


Gauge pod and pilar plastic for 92-95 Civic $30 Carbon fiber Autometer boost gauge $30


Apexi tach/ Blitz carbon fiber oil pressure and water temp. gauges mounted in a Autometer dash pod of 92-95 Civic. $450


NOS direct port kit. I have all the nossles. No bottle. $300

 

'95 H22a1 Cylinder head:
Bare head is $250
COMPLETE head is $350

2000 H22a4 Cylinder Head:
Bare head is$300
COMPLETE head is $400



OEM Honda h22 Oil Pump, Low Miles: $100.00 shipped



H/K series Shiftger box tray. This sits under your car so you dont have to cut up your floor to run the cables, Clean and the shifter sits lower.... $50 plus shipping



I have many vouches on HT. Fast shipping!!

 

FS: 24x8.5 Haulmark enclosed trailer, red. Dual HD axles, electric brakes, tires in good shape, ramp w/ extender, one side door, interior is all wood, have added one interior light, electric tongue jack, and additional wall tie downs, has four floor tie downs. will also include tongue lock, class IV load leveling kit with hitch and 2-5/16 ball. $5k picked up. Can discuss delivery or meeting for additional $ per mile.

 

Contact James@IPGParts.com
or call 407-324-4684 with questions or if you want to purchase.

Basically New:

Weld 13x9 Magnum Import Drag Wheels -- 4x100 Lug Pattern -- 5" Backspacing
MT 24.5" x 9" x 13" ET Drag Slicks.

Rims are brand new, tires just got mounted on them as a backup set by a raceteam to have in the trailer and are now deciding to run 15" size rims instead.

Tires have approximately 12 passes on them -- still in great shape

$750 Plus Shipping



Contact James@IPGParts.com
or call 407-324-4684 with questions or if you want to purchase.

 

For sale is a used MOMO Cup GT Fiberglass race seat. It hasn't been used in years, it was originally in my drag-race car. The back has a few minor scratches and two holes drilled in it (to attach to roll cage), but overall it's in very good condition. I'll include the aluminum side mounts. The seat can either be bottom or side mounted and it'll support a five way seat harness. The seat originally sold for $599 and the side mounts costs $120. I'm letting it go for $275 for everything, e-mail me with any questions, vtectuning@yahoo.com. socal pick-up preferred, shipping and packaging is costy for a seat.

 

Stuff for sale:

-Hondata s200 w/obd1 p28 ecu - $230 shipped
-Brand new 83mm Golden Eagle b-series vtec head gasket - $80 (will trade for 84.5mm HG)
-Used Golden Eagle B16A headstuds, all nuts and washers included - $90 (will trade for GSR studs)

Pics will be posted soon.. I only take paypal, buyer pays paypal fees.

 

Brand new 30-1040U AEM EMS. Brand new in the box, has the built in internal wideband controller. Comes with the wideband sensor. Plug and play for obd-1 92-95 civics and integras. 1050.00 shipped in the 48 states.

 

AEM serial datastream gauge(2 available)they are used and in good shape. i don't have pics. $250 shipped


AEM ignition module number 30-2820. brand new in box $300 shipped

ATI street damper for B series. It has a nick on one edge of the outer pulley but it does not effect it's performance
SOLD
M&W Pro 10 ignition box
SOLD
wavetrac limited slip for b16. used for about 8 passes. holds up just as good as quaife. only selling it because i upgraded to the pro level axles that use a spool. paid $850 new.selling for $575

GSR cams-SOLD

built K series engine:
K20A3 block
Golden Eagle Sleeves
K20A2 crank
Crower rods
Wiesco8.5:1 pistons
K20A2 head ported and polished by DSR Motorsports
Golden Eagle head studs
KMS vlaves, springs, and retainers
bottom end and head are assembled minus mounting the rockers,cams, and chain. all parts including rocker assembly, cams, chain, tensioner oil pump, timing chain, water pump and whatever else i left out will be included with the engine.
IM for more details
$3500




RSX Type S 6 speed tranny
$600


K20 Type R limited slip diff
$300

K20 intake manifold- have 2. one bare$100 and one with everything $200


K20 coils $100

Golden Eagle K20 fuel rail $115 shipped

t3/t04 turbo. .48 a/r w/ t4 p-trim exhaust wheel .60 a/r compressor housing w/60 trim wheel $600 shipped

 

FS or FT for JRSC kit for b18c1 motors (plus cash)

FULL SFWD fuel system. Includes: (less than one season of racing)

Jegs 10gal Aluminum Fuel cell
Aeromotive Eliminator Fuel Pump
Aeromotive A1000 FPR
2- Aeromotive Fuel Filters
Jegs Y-Block distribution block
ALL stainless lines, fittings -10an and -12an to go up and back from the rail in a Civic

PM me with Offers. If anyone has a hosting site, I can take some pics of everything.

Edit: pics up:

 

brand new pro drag 4 box looking to get 850 shipped

 

Del Sohn Racing 1994 Del Sol

ASKING: 29,500 turn key ready to race!

Car ran 8.94@162
Top mph 168.9

Engine:
ERL Performance built GSR short block 2.0l with 5 journal ERL Girdle
Darton Sleeves
Manley Turbo Rods
JE Pistons with coatings
Carbon coated bearings
M2 Ported Cylinder Head
Cometic MLS Head Gasket
Ferrea complete Valvetrain
Ferrea Roller Rockers
Crane custom designed cams
Edlebrock adjustable cam gears
Type R valve cover with custom vents for Z10 motorsports evacuation system
Edlebrock Victor X custom Intake Manifold
90mm accu Fab polished race Throttle Body
Custom water/air Intercooler with 4" piping from turbo to throttle body
Edlebrock fuel rails
Eight 1000cc Fuel Injectors
Weldon Fuel Pump
Aeromotive Fuel pressure regulator
Full Race custom exhaust Manifold
Inovative T74mm ball bearing turbo
4" exhaust piping
Tial wastegate
Twin Tial Blow off Valves
Accel gen 7 DFI Engine Management
MSD Ignition
MSD Cap and Rotor
Odyssey PC1200 Battery
Custom Griffin aluminum mini radiator
NGK spark plug wires
NGK spark plugs
NGK wide band 02 monitor
Custom Moroso Oil Pan
Z10 wet sump modular oil pump system
Carbon/Kevlar engine Diaper
Toda Timming belt
Custom side mount timing belt tensioner
NOS direct port system (not in use but plumbed and ready to install)
Custom Fuel Cell

Driveline:
G-Force gear set with handcuff
Quaife differential
Golden Eagle scatter shield
Tilton carbon/carbon clutch and flywheel
Tilton Hydraulic Throwout Bearing
G-force/Long H-pattern shifter with pistol grip handle with top button activation.
Drive shaft Shop Axles and Hubs

Chassis:
Franks Custom Chassis parts including,
Front Traction bar system with angle control,fully adjustable
Funny Car Cage and backhalfed with straight axle
Wheelie bars w/wheelie bar net and wheeleze wheels
Strange rear spindle mounts
Strange rear Brakes
QA1 Rear coilover adjustable rear shocks
Skunk 2 adjustable front control arms
Skunk 2 Front drag coilover springs
AGX adjustable front shocks
Bogart Billet star Front wheels
Weld spindle mount rear skinny stars
Mickey Thompson 28x10x15 front slicks
Goodyear rear skinnies

Exterior:
Franks Custom Fiberglass:
Carbon fiber front end
Carbon fiber doors
Carbon fiber trunk
Carbon fiber adjustable rear wing
Percy's Lexan windows
Simpson Parachute

Interior:
Sparco steering wheel with two step/antilag control button
Quick release for steering wheel
Simpson camlock belts
Autometer tach w/shift light
Autometer gauges Boost,temp,volts,NOS pressure
Moroso switch panel
Hydraulic Handbrake and line lock
"Coldfire" Fire supression system

If car is purchased, I will sell you the 28 ft Trailer finished off inside, and golf cart as seen in the pictures for an extra 6,000

 

ULTIMATE H22 SALE

h22a1
RS sleeved
arias 14:1 high comp pistons
golden stepped deck
H2B ready for QSD
oil pump
water pump
(needs manual tensioner conversion)
$1250

H22a4
jg sleeved
89.50
mains
accord F23 97 stroke crank
$500

H22a
H23 crank
h23 rods
arp rod bolts
new type-S pistons
new OEM RINGS
new ACL bearings
prodrive oil pump
kaizeen B/S elim kit
$1000 obo

RMF H2B header made for QSD KIT-900 obo coated inside and out