Got my oil return plugs for G series build
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 880
Likes: 0
From: Klamath Falls, Oregon, USA
Got my oil return plugs for G series build
Got my plugs today from the machine shop just need to find some o-rings. I would like to thank RMS for his specs on the plugs.
This is a side project that im working on. Going to have the block bored for the DC5R pistons and just do some minor bolt ons. Just aiming for the 220 or so mark with it.
EDIT: The reason the look a little ruff is i put assymbly lube on them and test fit them.
This is a side project that im working on. Going to have the block bored for the DC5R pistons and just do some minor bolt ons. Just aiming for the 220 or so mark with it.
EDIT: The reason the look a little ruff is i put assymbly lube on them and test fit them.
Last edited by h224thgensedan; Feb 18, 2009 at 07:37 PM.
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 880
Likes: 0
From: Klamath Falls, Oregon, USA
Re: Got my oil return plugs for G series build
I havent heard of it being a problem with reading in PirateMcFred's thread and reading in Prelittlelude's thread on their G series builds.
Thread
Thread Starter
Forum
Replies
Last Post
