ok this is my crx...
d16y8 converted to obd1 w/p28

i got my 4wire 02 and how do i hook it up? because im running in limp or safe mode...
i know the single 1 wire for the 02 wont work duuh..

o and i dont got the female end of the 4wire from the engine harness..i think i need right?

 

2 wires on the sensor get grounded. one is for the air/fuel signal and the other is for the heater.

 

ok so ground the 2 black wires and where can i find the air/fuel signal which wire..and im guessing hook the other to the thermostat? or where can the heater b found

 

2 are heaters one signal wire one ground.you jumper harness instruction should tell you exactly what to do.if you dont have them go to their website.

 

not trying to jack the op's thread, but my jumper harness only has two wires to hook up to the 02. and i cant get it to work, and i dont know what kind it is (i got it off craigslist).

 

Kulangot you have any pics?

 

uh what? the other wire is for the o2 sensor heater signal