So I purchased 2 of these (I now have 4 resistors) so I can do LEDs for all my turn signals:

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

However, I am not too sure how to use the non-splicing things. Also, for those of you who have done it, which wires do I put where and what is a good spot for the resistors since they head up? Thanks.

BTW, just in case, I am doing the 2 tail turn blinkers and the 2 front blinkers.

 

Installation instructions for the load resistors are on the ebay's seller regular website:

http://www.v-leds.com/Shop/Control/P...d/0/SFV/32481#

This other led seller also has instructions:

http://www.superbrightleds.com/pdfs/...istor_info.pdf

 

i thought thats what i did when I installed it and I still got the hyper flash. I connected it to a black wire and to a red wire with a blue stripe.