Does anybody here have any idea if the rear performance bar for the ITR, the one that spans between the taillights is a direct bolt in for a non-R?? The search was pretty inconclusive.

Rgds,
Jack

 

really?

https://honda-tech.com/zerothread?id=176819
https://honda-tech.com/zerothread?id=219722

 

yes really, I came up with one relevant thread and the discussion was about putting them into EKs, with no mention of whether anyone had slapped one into a DC2 without having to bust out the welder.

 

again

https://honda-tech.com/zerothread?id=219722

 

search

I usually have to do about four or five searches before I get exactly what I am looking for.

As for the rear brace- I don't really know if it makes any difference on other cars. I have heard a rear upper and lower tie bar is all you really need. I am keeping mine on just in case

later

matt

 

Well obviously I didn't search hard enough eh, thanks for the link. However, has it in fact been verified that it will not bolt up or is it merely hearsay?

 

As a former owner of an EG2, I am absolutely conscious of how unrigid the EG/DC chassis actually is. The EG/DC may be better than a Del Sol, but it still sucks. I take everything I can get.

J


[Modified by jingram, 9:05 PM 8/9/2002]