Hello for all.
First, I like to give congratulation for the forum because were i can found very utile and precisely information about Honda models, second i ask excuse for my English because is not the better.
I from Portugal and I have a Honda accord 1.8 98/12 and i need to connect a obd scan to monitories parameters, I buy the connector like the picture above, but when I go to connect this to my car i don’t find de car connector.
I have searched for all over car, and they don’t have this connector.
But I find the ecu, it’s a EBD2B the code of ecu is 37820-PDA-G01 I take photos of this.

I like to know if I can connect the obd diagnostic toll directly to de ecu?
And what the schematic I need to do.
I see that k-line pin from ecu don’t have any wire connect, but I find 2 blue connector one whit 2 wires and one whit 5 wires.
I need monitorize O2 sensors for a university project, if anyone can help me I appreciate.

The pictures of my ecu and blue plugs.

 

I forget to say, in conetor A pin21 (k-line I think) I dont have any wire.