I parted out an EG hatch. These are the remaining parts.
If you don't think a price is fair then throw me a reasonable offer I won't roll my eyes at.

Pickup Location: 10954 NY. Willing to meet up to 15-20 miles.

Buy with confidence. Paypal verified, with over 120 transactions. 100% Positive feedback on Ebay



Contact: todaparty@gmail.com (also my paypal)
or call/text 845-641-0999 (Jason)


BVTEC Fluidampr/ATI damper Street, or OEM crank pulley in good condition


Hella Supertone horns - SOLD
B-series vtec Spark plug cover - SOLD
Alpine Speakers - SOLD
OEM Nissan HID ballasts - SOLD
ITR imitation shiftknob in black - SOLD
LS 5th gear - SOLD
Tial 50mm bov Al flange - SOLD
EG "mugen style" Lip - SOLD
Tilton Hydraulic Release bearing – Bseries - SOLD
Defi Boost Gauge D-gauge - SOLD
Apex’I AVCR Electronic Boost Controller - SOLD
Momo Competition 350mm Steering Wheel - SOLD
Sparco 2" Clubman 4 point buckle harness & Corbeau 3" 5 point camlock harness - BOTH SOLD
Distributor Ignitor - SOLD
B-series VTEC Cap, rotor, gasket, rotor screw - SOLD
Honda logger - SOLD
Rear Seats for EG/DC - SOLD
EG Carbon Fiber Hood- SOLD
JDM EG Headlights - SOLD
NGK spark plug wires for Bseries- SOLD
OEM HONDA EG Lower ball joints - SOLD
ROTA center caps - SOLD
JDM EG VTi Gauge cluster - SOLD
EG Carbon Duckbill - SOLD
PLX M300 Wideband - SOLD
JDM EG Vision Smoked Amber Corners -SOLD
Tial Wastegate Spring (Large Red) - SOLD
Fastbrakes 11" 4 piston Wilwood Dynalite Caliper front brake kit - SOLD



Del Sol Seats - KEEPING THEM - Good condition, small tear on driver’s side bolster, Green stripes, EG/DC rails.



Parts for Pickup Only:
x


Parts I'm willing to ship:



HA sport EG/DC B-series mounts (3) - $265 shipped - Used, still work fine, little scratched up. Race hardness.





DC Sports JDM 4-1 style header, B-series. $120 shipped - 2.5" Collector. Its got some surface rust/ceramic coat is peeling. You can probably sand it down and repaint or recoat it. No dents on the bottom, other than the rust its in good shape. Pic to come.

http://img.photobucket.com/albums/v3...e/P1010074.jpg

http://img.photobucket.com/albums/v3...e/P1010075.jpg



Motorola 2.5 bar map sensor - $20 shipped- HPX4250AP K0501AL on the back. New wires soldered on. Used it for like a day then replaced it with a 3 bar.




AEM 2.5” short ram tube- $50 shipped - Bracket is cut off. No filter. Couple scratches.



DC/EG 19mm rear sway bar - $50 + shipping, or 75 shipped, whichever ends up cheaper - I believe its a suspension techniques, but don't quote me. Comes w/ the bushings for the subframe, but no end links.



Phillips D2R HID bulbs - $60 shipped, will not sell just one unless you find someone to take the other.



Mercedes ML projectors - $45 shipped NON bi xenon.

http://img.photobucket.com/albums/v3...e/P1000834.jpg


Acura Amber Radio - $50 shipped – Mint, works fine. I have an IPOD radio, so I don’t need this one anymore. Will include security code obviously.



Honda centercaps $35 shipped – Rota ARE SOLD. – Hcaps are P/N 44732-S0X-A00


http://img.photobucket.com/albums/v3...e/P1000862.jpg

Yokohama Advan A046 (2)- $100 235/45-17, stock Evo 7/8 tires. Good tread left, see pic, probably between 70-80% tread left. 2nd pic is a closeup of the wear indicator.




B/D series VSS - $30 shipped



Compustar Alarm w/ Remote - $50 shipped – Just the remote and the brain.



OBD2a (97)LS intake manifold w/ AIT & IACV(not in pic, will include) - $ 40 + shipping

http://img.photobucket.com/albums/v3...e/P1000837.jpg

OBD2a (97)LS Water Neck (back of the block)- $15 shipped

http://img.photobucket.com/albums/v3...e/P1000849.jpg

OBD2a (97)LS Thermostat housing - $40 shipped - thermostat, coolant sensor included

http://img.photobucket.com/albums/v3...e/P1000846.jpg
http://img.photobucket.com/albums/v3...e/P1000847.jpg

OBD2a (97)LS timing belt cover - $20 shipped

http://img.photobucket.com/albums/v3...e/P1000859.jpg

LS alternator belt - $ 10 shipped - good condition, about 15k miles

http://smg.photobucket.com/albums/v3...t=P1000851.jpg

3” Exhaust 3 bolt flange- $15 shipped – I cut it off so I could run an exhaust clamp. Its off a Lovefab 3” exhaust.

http://img.photobucket.com/albums/v3...e/P1000865.jpg

Thermal sleeve for 2.5 piping - $20 shipped - 3 inch or so long tear, doesn’t really affect it. Good for shielding IC piping from a turbo or an exhaust manifold..

http://img.photobucket.com/albums/v3...e/P1000870.jpg

90 Degree mandrel bend intercooler pipe 2.5” - $25 shipped - bead welds on the ends for sealing. Mild steel, 2.5”.

http://img.photobucket.com/albums/v3...e/P1000867.jpg

Stock EG hatch upper control arms Make Offer
http://img.photobucket.com/albums/v3...y/P1000616.jpg

OBD2a (97)LS timing guide plate (goes between the drive and the crank pulley Make Offer

http://img.photobucket.com/albums/v3...e/P1000860.jpg

 

bump

 

ty sir, bump!

 

TTT, interested in some parts!

 

bump, WG spring & Visions sold!

 

interested in the header

 

header pics added

 

TTT for a good guy right here!

 

brakes pending

 

brakes sold, TY!

 

Nice!

 

bump!

 

pm'd

 

payment sent

 

Bump for looking.

 

ill buy that vss off u. pm me