Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.

 

k24 code(k24a4-634-1972) lb pulled from an 04 element with 30xxx miles -$600
MB products EK style fiberglass front end and mounting hardware - $600
Brand new:::: D-series pr29 11:1 pistons, rings, pins-$100

all prices are firm
Buyer pays all shipping and 3% PayPal fee's

 

Radio, good for track use. 50 shipped - Brand new



Velocity stacks, 1.75" flange on small end, 3" OD on inlet - 100 shipped



Sparco suit, Size 56. Used for one season, 3.2A/5 - 450 shipped







Springs - 8" x 2.5 - 450lb rate
I will also have an 8" x 2.5 - 500/550lb set when my car is home in a week or so. 450's were used for 40 passes, the others just for rolling the car around on. The 450's are green, others are blue.




I need all of this stuff gone in 5 days, the MC's are FIRM but the other stuff is something we can work on.

Thanks!
-Ryan

 

Inline Pro Manifold for sale. The Manifold has been ported out for a T4 turbo. 350.00

BRAND NEW GRP aluminum rods for sale for 84mm bore. For LS/ B20 motor. 400.00

1995 GSR head stock! All caps, cams, cam gears included. All is stock out of a GSR. 350.00

Used Super Tech valves in good condition, nothing is wrong with these valves. (going k-series) 100.00

Used 65mm Edelbrock throttle body 175.00

 

Prices do not include shipping or Paypal charges unless otherwise stated. I might consider some trades, just let me know what you have to offer. More pictures upon request.


Up for sale is my 88 Honda CRX SI rolling shell clean title. Car has been family owned. This car is a head turner. Gets compliments everywhere it goes. Very few clean CRX’S left. My accomplishments: In 2004 at Import motion Best CRX award , BOTI Seattle 2nd place in S/C, NHRA Pomona 2nd place in SFWD. In 2005, BOTI Seattle 2nd place in S/C, NHRA Pomona semi finals in SFWD. In 2006 NHRA Pomona semi finals in SFWD. What’s all included: NHRA certified chromoly cage(this alone would cost you $1500-$2000), Moroso battery box, battery shut off switch, jdm type-r cluster, driver Sparco bucket seat, fake spoon steering wheel, Type R floor mats, Black with red stitching shift boot and e-brake boot, sump fuel tank with one -12 line 3ft long off the sump, one -10 line 2ft connected to a Magnaflow splitter with two -8 lines ran to the engine bay also one -8 return line, front extended wheel studs, stainless steel brake lines all around, Tilton master cylinder (car has been converted to hydraulic, meaning no more crappy cable tranny problems), also Tilton slipper valve, wings west body kit and fiber image hood with a little damage on it. Car is street legal, all headlight and turns signals work. Would not take much to have a nice Street Comp car. $3300.00 OBO





CLICK ON PICTURES TO ENHANCE IMAGE











Here is some pictures of when the car was running.






Used Motec M4 with all options unlocked. Comes with data cable, baro sensor, distributor, o2 sensor and the motec Honda harness. Harness is missing a few connectors: est, positive battery, baro,wastegate, map, aux temp. $2600.00 OBO




Set of Bogart wheels with MH Slicks 1000.00(Pick up only)
*Frt. 13in wheels 8.7/25-13 MH slicks
*Rear 15in wheels 3.6/24-15 MH DOT Skinnes




Simpson Bandit Helmet Large SA2000 date of MFG:02/05 SOLD


Impact Racing Jacket and Pants size: X-Large SFI 3-2A/5 Approved. SOLD


JDM GSR hydro tranny W/OBX diff. SOLD


B series v-tec NGK spark plug wires W/MSD cap and coil wire SOLD


Two B series starter's left $50.00 each



One B series half shaft left $75.00



Edelbrock intake manifold (b16 or Type-R head) with 76m Blox T-body SOLD


Complete turbo kit made for a CRX. Kit includes: Inline pro T4 manifold with a Tial V60 (1 bar spring) with dump tube, Burg Warner S372 turbo with 4in down pipe and -10 oil return line and -4 feed line, , 3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom intercooler (precision core 24x12x3). $3000.00
OR
3in aluminum piping with Vibrant V-bands (x3) hose couplers (x2) with clamps, Tail bov, and a custom back door intercooler (precision core 24x12x3). $1000.00









Complete long block. Motor has very low miles only made it to the track less then 8 times this year. LS block with Golden Eagle sleeves, head studs, mains, girdle, head gasket, golden eagle vtec conversion kit, block is bored 81.5 with Eagle rods and JE pistons 9-1, Type-R head port and polish with 1m over size supertech valve’s, retainers and springs, crower turbo cams. $3500.00 (Pick up only)
Compression Test
COLD WARM
1) 200 210
2) 185 200
3) 200 205
4) 195 210







M&W PRO-10 with harness $425.00 SHIPPED



MSD Blaster II Coil $125.00




Magnaflow Regulator $140.00




Catch can W/lines & Valve cover. SOLD


(Bosch top feed fuel injectors# 0280 150 846) SOLD


Golden Eagle Scatter Shield SOLD


G-Force Window net (date: APR. 08), G-Force Seat belt (date: AUG. 08) G-Force gloves (size: large) $140.00




G-Force Seat belt (Expired) perfect for the passanger seat. SOLD


Custom center console for a 88-91 CRX W/ Auto Meter Gauges (Boost, Oil, Water) and Carbon Fiber switches SOLD


STR fuel rail W/-8 fittingsSOLD


AEM Fuel Sensor $100.00




AEM 5 Bar Map Sensor $120.00




Boost Solnoid $120.00




Gator Axles 300M (RARE) $850.00






Full Race traction bars for CRX (used for 8 races) SOLD


Omni Power Drag coilovers for EG and DC2 SOLD

 

Starting to part out my SPWD set-up.
Buyer Pays Shipping and add 3% for paypal fees.

AEM EMS for OBD1(1040 box) $750
Already set-up for the t1 cam trigger.


MSD Digital 6 Plus $125

MSD Blaster HVC-2 Coil $100

Full-Race Twin Scroll Top Mount $950

4 Inch Aluminum Downpipe To Match Above Manifold $275


Custom Intercooler/BBK 70mm Throttle Body/3" Charge Pipe with Tial 50mm BOV(polished) All Charge Piping V-Banded Together/other charge pipe for GT42r Turbo and Manifold Above. Was in EG With Full-Race Intake Manifold
$1050(perfer pickup but will ship. buyer pays shiping)





Precision 1200cc Injectors $300(used for 2 races)

Mahle Pistons 81.5mm $425



Avid B-series Mounts(eg/dc)(all 5 mounts)(other 1 is still on the trans) $250

Inlinepro T4 Turbo Kit $2600
Manifold, turbosmart wastegate, gt4088, 3inch downpipe, intercooler piping, inlinepro bov, gm 3 bar map sensor, gm boost control solenoid, oil feed and return line precision 750 intercooler


ERL Sleeved GSR Block with ERL 5 Main Girlde 85mm(good for allmotor)(no crank $1000

 

-I'm selling the Xtrac tranny from our crx. It's a 6 speed sequential setup. Includes midplate to bolt up to a b series motor, custom flywheel, and AP 5.5" triple disc clutch. We have some extra clutch parts we'll throw in for it.Does not include a workin diff. Axles not included. $6,000 takes everything

-BDL fuel rail. B series .Brand new, no anadizing, raw aluminum. $100 plus shipping
(714)290-2663 Tony

 

selling a used Tial 44mm wastegate. its silver, has a 1bar spring and worked flawlessley for me. Going to a divided manifold and buying two new gates. has a straight dumptube and no flange for the manifold. SOLD

 

new never used b16 head, skunk2 valve springs, retainers, valves. S&S speed shop [in queens, ny] port/polish. 3 angle valve job. milled .020". new lmas, new valve seals. $1300 plus shipping.





NOS 4fogger direct port nitrous system. complete w/ pressure gauge and bottle warmer. setup for a 120 shot. $550 plus shipping.




newly built darton sleeved ls bottom end 85x89. it comes with new coated WISECO 85mm 9.5:1 pistons, new EAGLE ls rods, knifeedged/balanced/micropolished crank, DARTON sleeves, new ACL race coated bearings, new COMETIC 85mm headgasket. missing oil pan, oil pump, water pump, and timing belt.
selling for $2000 firm.

 

Tried selling this stuff before and had a bunch of people say they would pay and never did. Make any reasonable offer.

Lower front radiator support oem honda never used. for 92-95 hatch

Golden eagle scatter sheild for gsr

L-con traction bars for 93 hatch. Used and have some scratches.

Xact race flywheel for gsr.

OEM oil pump for ls/gsr

arp flywheel bolts for gsr
Auto meter small shift light
Oem gsr timing belt for gsr
Prothane rear trailing arm bushing kit 88-00 civic

 

FS: 24x8.5 Haulmark enclosed trailer, red. Dual HD axles, electric brakes, tires in good shape, ramp w/ extender, one side door, interior is all wood, have added one interior light, electric tongue jack, and additional wall tie downs, has four floor tie downs. will also include tongue lock, class IV load leveling kit with hitch and 2-5/16 ball. $5k picked up. Can discuss delivery or meeting for additional $ per mile.

 

I got a GSR tranny for sale, here's the info:

Y1 V-tec cable transmission, Quaife LSD, New syncros and input shaft bearings $800 plus shipping

 

Edelbrock 8 injector intake manifold. Brand new in box. Fits b16a/type r cylinder heads. Non-polished finish. 475.00 shipped.

OEM Honda 4.78 final drive "kit". Includes ring, pinion, shaft collar, bearings and 1st gear. Has about 20 passes on it, in like new condition. 350.00 shipped.

Skunk2 b-series 70mm throttle body. In like new condition. Comes with OEM honda tps sensor. 200.00 shipped. This throttle body does not have sticking issues! Most do, this one I personally modified so that it does not.

Walbro 255lph HP "inline" fuel pump and installation kit (includes mounting bracket, fittings, crush washers and pump mounting sleeve). Brand new, 2 available. 100.00 shipped for each.

Do not lowball! Prices are fair and firm, and include shipping in the 48 states. Not interested in trades. Will have pics up tomorrow.

 

F/S Skunk2 Pro2 B-Vtec camshafts like new less than 100 miles $450 shipped


F/S Skunk2 pro cam gears b-series also like new less than 100 miles $150 shipped



F/S Clutchmasters lightweight flywheel b-series same also like new less than 100 miles $215 shipped



F/S MSD digital 6 plus w/coil $200 shipped

F/S AEM EMS w/wideband 30-1060u box $750 shipped



paypal verified please add there 3% proccessing fee Thank you, pm for questions or call cory @801-680-8232

 

I have a good condition B16 Quaife LSD for sale. Asking $600 shipped. I also have a Pro Drive spool for B Series $250 shipped.

 

TEIN hood dampers for 94+ integra slightly used $75

MINT Corbeau TRS seats with corbeau sliders and NEW corbeau 5 point harnesses. Seats where bolted in and sat in maybe 5 times.. $700



AEM oil pressure gauge. comes with the gauge and harness. all you need is the sensor $80

Hasport race mount 94A upper tranny mount $100

Fuel lap FPR needs a new Diaphragm $50


NO TRADES!!!!

 

Everything is OBO and does not include shipping.

NLR AMS-500 $300

http://i169.photobucket.com/al...1.jpg

Full-Race Vacuum block (BRAND NEW) $40

pm me for any questions. add 3% for paypal.

 

RMF custom side exit no other like it $1000obo

2 Mark williams spools and flanges with intermediate shaft best stuff on the market $1500obo


Used Dta E48 with harness sensors and crank wheel for b-series $1400obo

Evolution industries locking cam gears RED $280

Ls gearset $300
Used set of 4 450cc injectors green top high resistance $150
Used venom pump with -6fittings $150
Used aeromotive fuel pressure regulator with -6 fittings $200
Race Block B20 Custom 95mm stroker cranck, one of a kind Saenz rods 425grams made out of 300m Custom 14:0:1 CP pistons, $3500obo
Edelbrock fuel rail with honda fittings $150

Buyer pays shipping and paypal fees
PRIVATE MSG ME IF INTERESTED

 

TWM 54mm H22 H2B ITB's. Brand New,

$1500 Shipped


Skunk2 1000lb/in - 18kg/mm Drag Springs Brand New

$175 Shipped

 

Sold. Thanks.

 

FS: GT4294 Journal Bearing Turbo

Used for one season, has a lot of life left in her. She made 45psi last season hitting boost cut (In Utah). Compressor housing is powder coated black. 1.01 AR exhaust housing.



Asking $800+shipping FIRM!

FS: Digital 6 Plus w/MSD HVCII Coil

Used for one season! Sat inside the car under the passenger seat. Comes with wiring.

This is the Ignition box:

http://store.summitracing.com/partde...5&autoview=sku

And the HVCII Coil:

http://store.summitracing.com/partde...5&autoview=sku

Sold together! Do Not wanna part them out...

$300+shipping FIRM!



PM Me for any questions.

 

Fs. Jackson Racing supercharger. Great condition. Comes with everything! 8 psi pulley. Idler pulley is alittle melted from heat, but still works fine. This is for a b16 head. Will let go for 800.00. This is for a friend and i will post up pictures for him later.

 

Sold it all!!!!! Thanks h-t!!!!! You helped pay for a 04' mach 1 mustang! Mods please delete!

 

got some parts for sale still, left over from a race car that was parted out.

Email James@IPGParts.com
Phone -- 407-324-4684

Complete Setup Kit:

Peakboost Top Mount T4 Turbo Kit including, T4 Top Mount Exhaust Manifold with Tial 60mm W/G Flange, 4" Downpipe, 3" Intercooler Pipe Kit Tial Flange with Silicone Couplers and T-Bolts, Intercooler Core, Turbo Feed and Return Lines -- $2500

Individual Parts:

Intercooler Setup Only -- includes Garrett 24" x 12" x 4.5" core (32" total length including endtanks) -- 3" inlet/outlet, all silicone couplers, all t bolt clamps -- tial 50mm bov flange already in place -- for a top mount turbo setup (was installed on a 94-01 Integra Chassis, will fit others with possible modification required) -- $1350

Peakboost Top Mount Manifold (T4) with 4" Downpipe -- $1350

Garrett GT4294R Turbocharger with 1.01 A/R -- $1390







__________________________________________________ ___________________________

Basically New:

Weld 13x9 Magnum Import Drag Wheels -- 4x100 Lug Pattern -- 5" Backspacing
MT 24.5" x 9" x 13" ET Drag Slicks.

Rims are brand new, tires just got mounted on them as a backup set by a raceteam to have in the trailer and are now deciding to run 15" size rims instead.

Tires have approximately 12 passes on them -- still in great shape

$750 Plus Shipping

 

FS: Arizona Forced Induction Bseries T4 Topmount Manifold 44mm WG flange, 4" Vband Downpipe, Dumbtube, all stainless steel. $1200 OBO



50mm Red Tial BOV $200


72mm RPM Throttle Body $250 OBO


Innovate LC-1 Wideband set up with display gauge. Come with everything in the box and one extra sensor $200



60mm Black Greddy Boost Gauge $100 OBO


52mm White Greddy Electronic Oil Pressure Gauge $150 OBO