Well somehow some way they find a way to get you.

Well I was in the process of building a Fully Built Turbo JDM B16A.
Friend was in the process of a Fully Built H22A Turbo
Co-Owner had pulled out his fully built LS/VTEC just to fix some oil leaks
Another friend had just pieced a JDM GSR Turbo setup that was going in his DA.

Everything was located in Glen Burnie, MD at SJS Racing Concepts which is owned by Sal, Shane and Jon(from Pinks) which are all very very good friends of mine.

Everything this was stolen-

JDM B16A was all in boxes
-Golden Eagle Sleeved JDM B16A Block Bored 84MM Bare
-Race Port and Polished JDM B16A Head from Alanis Motorsports
-JE 12:5.1 84MM Pistons
-Eagle Old style Small bolt Rods
-Brand new JE 84MM Rings
-Brand new ACL Bearing set
-Brand new Eagle Sharp Edge Knife Crank
-Brand new Borg Warner SC366 Polished Turbo
-Brand new Precision 750HP Intercooler
-Brand new 38MM Tial Wastegate
-B16 Oil Pan, Oil Pump, Water Pump, VTEC Solenoid, Scatter Shield, Black VTEC Valve Cover which edge cut for cam gear view, Lower Timing Cover from P72
-"AQS P72" Labeled P72 OBD1 tuned with All Motor Type R Tune on Neptunes by Sal with 8000 RPM Redline and Adjustable Two Step from 3500-7500
-Hasport B Series Trans Mount
-Cable B Series Clutch Master Twin Disk with plenty of life left
-ARP Rod Bolts, Main Bolts, Headstuds, Flywheel Bolts etc etc
-P73 Intake Manifold with AEM Fuel Rail, 65 BDL Throttle Body, Direct Port Nitrous Setup on the bottom side of the manifold with a 110 shot all done custom by Sal
2 Nitrous Bottles One Blue NOS and one Grey NOS bottle
Friends ZEX Dry Kit with Purple Bottle
Everything on my setup was in boxes from my old setup. And was the beginning of rebuild


Howard(Hondata03)

-H22A ERL Block 90mm
-90MM CP 10:0.1 Super Flat Top Pistons
-Eagle Big Bolt H22A Rods
-Micropolished crank
-H22A Head Polished
-DHR Valve Springs and Retainers
-ARP Headstuds, Mainstuds
-Brian Crower Stage 2 Turbo Cams
ETC ETC Motor was fully assembled minus Oil Pan and Valvecover! On the motor stand. Took the pin out and slid the motor off the stand.
-Eliminator Fuel Pump with Fuel Filter and Lines
-Clutchmaster Twin Disc H22A

JDM GSR
-Blox I/M
-Omni Throttle Body
-ACT Clutch
-Flywheel
-Garret 50 Trim? Turbo pretty small turbo
-RC Injectors
-Silver Intercoolerf Piping
-Greddy BOV Valve
-ETC ETC Just a basic 300 WHP+ Turbo Setup
Hondata S200 Setup

LS/VTEC Turbo Setup

ERL Sleeved Block B18B1
Skunk2Pro 1 Cams
B16 Head
P28 Neptune from Sal
Valve Cover has 2 Bungs for Oil Return
Dont know too much about his setup but yeah. This was Shane setup and were all going crazy.

Eagle Talon AEM EMS


Will finish list later yes I know! LYFE SUCKS!

Yes this was at a shop/garage

The H22A, LSVTEC, JDM GSR were complete motors. My B16A was in boxes

Cops didnt fingerprint cause they are douche bags just because they said whoever did this would have used gloves. ****ing idiots I tell you.

Happened between 9:30 and 3:00 AM On Friday night as all of us were down on 70 racing. All of the big spanish theives from PG where down there which elimate them having to do with anything. Found the garage was found open at 2:45AM

Neighbor said they saw a Black Vehicle come in and out twice.

 

They stole this from a shop? Damn Maryland sucks. Good thing I got a cheap storage unit for my k-series hatch. Sorry to hear that man. Hopefully you find who did it.

 

yea that does suck. well hopfully they will find them and get it all back happily in the hondas WHERE IT BELONGS lol

 

i know shane pretty well, i met sal..i'll keep my eyes open.

 

Jon told me saturday. im keeping an eye and ear out for you guys. ive told a few other shops also, so hopefully it will all get recovered. Was anything insured at least?

 

No living close to the city in MD sucks. I will keep an eye out here in SOMD but chances are its in PG county...

 

damn this is nuts. stealing a car is one thing but it takes at least 2-3 people to pull off something like this. who just goes around picking up engines. and was this last night in that **** as snow/ice?

 

that sucks, i knew shane from high school... Glen Dirty sucks *****.

 

Personally I think its in Baltimore or Anne Arrundel County. Theives are everywhere not just PG County

 

the thieves in PG are salvadorian lol spanish is too generic lol im puerto rican im not a thief ill keep an eye out and ask around in mo county for u

 

I know plenty of Puerto Rican and Dominican theives all over from here to Chicago and New York

 

So please save me the sob story saying its just Salvadorians wen there plenty of theives who also Asian, White, Spanish and Black.

Honestly if the mother****er is purple I am still going to whoop his ***! I dont care what color he is.

 

im just messin with u man i kno thieves come in every color but anyways ill keep an eye out and let u kno if i hear anything

 

Thanks

 

life's a bitch and then you kill someone its me H alot of people know my from baltimore to moco to pg who ever stole me and my boys **** is going to pay something will surface eventualy and then bitter sweet revenge will take place anyone who knows me knows i put alot of money and 6 months time building this motor i will not rest till someone pays.....

 

it sucks..someone stole my hood Off My Car That i bought from shane...sitting in a public parking lot..so if you see a OEM seibon hood for an EG LMK!!

 

Damn man...i bought some **** from you a while back out of ur EM1. Sorry to hear about your ****, you know I got an eye out for you down here.

 

well if you know all these theives, can you point me in the direction of where my car is?

im looking for my 1993 del sol. white with red interior, on red sportmax 501's.

lmk

 

Damn thats just ridiculous. Tell Jon i'm sorry to here that. Cant have **** anymore. I was actually just there last month when i dropped of some gsr wheels i sold to a friend of his.

Yea and if you know any of the theives in PG that stole the polished slipstreams off my red coupe a few weeks ago lmk as well. The car ended up in PG county.

 

Wow this s**t is getting out of hand, i stay in northern va and have heard of the similar problems. Last i heard there was and investigation with some guys out here in falls church, but who knows what came out of it. I'ma keep an eye out for ya.

 

OMG that sucks! Sorry for your loss guys. With a theft this large, something is bound to pop up! People need to get alarms on there shops!

All I gotta say is Mr.StreetRacinThug if you know so many ****ing thieves you need to step up and report them. Not to be a dick, but barging about knowing all these thieves and running around with guns really makes you look bad.

 

May I also suggest putting up a reward. With the amt of parts stolen I would have no problem starting with a 500$-1000$ reward for evidence that leads to an arrest and the return of all your parts.

Or even carry around a few hundred dollar bills and offering them up for info. In a few days allot of people are going to know who pulled of something this big.

 

Well Mr. White Smoke I dont care what people think about me knowing theives. I have tried helping people and they never do ****. I found out who stole the JUN Civic and I tried telling dude who had his fully built Type R motor and his Sparco seats and his white VOLK TE37's. I have given so much info for all people that have had their **** stolen. Honestly I have pointed people in good directions and they ruin it. So please I dont care what anyone says about me. I am a legit ****ing person work 54 hours a week and have reciepts for everything on my motor and car.

 

I am not accusing you of anything! Don't get the wrong idea... I am just saying how this could be perceived.

 

I personally lost my fully built LS/Vtec long block. The following parts are what are missing.

ERL B18B block 83mm w/ arias 9.5-1, eagle h beam rod
B16a cylinder head w/ stg 2 p&p, supertech valves, skunk2 springs and retainers
Edelbrock victor x manifold, Edelbrock 75mm throttle body, Edelbrock adapter plate
Skunk2 composite fuel rail, precision 1000cc injectors, Aem 3.5 map, Skunk2 tuner cams
Black valve cover 4 -10 bungs welded, Skunk2 pro 1 cam's, T1 block fittings, greddy sandwhich plate, P06 chipped ecu w/ Neptune RTP, Custom Mil-spec harness w/ labels made w/ expando braid and raychem.

That about sums it up. I know I am missing something. I lost big time on this and a lot of customers and close friends have too. I am offering a $2000 reward. PLEASE if you have any info contact me. I have dealt with a lot of people on HT and I have plenty of vouches. Thanks for the support.

Shane
410-245-1005