I keep seeing people asking about rear disc swaps so why not get some of the information compiled in one place. By now we all know they weigh more, have pros and cons... yadda yadda - so what. No need to repost that here.

I'd like to see information so that if somebody wanted to swap to discs they could have a nice parts list to go to the junkyards with.

Please include the following -
Model vehicle you have (hatch, sedan, CRX),
Trim (DX, LX, ...)
What model vehicle (and year) you sourced your rear discs from
What vehicle and year your ebrake cable came from

Please, no HOW TO questions - go start a new thread for that.

 

91' civic hatchback dx
00' integra rear disk
00' integra ebrake lines
91' civic toe adjuster(dc2 was too long)

 

88 crx si, used 93 integra rear disc trailing arms discs and calipers, crx/civic toe adjuster, obx upper control arm/camber kit, 88 crx rear lower control arms, 90-91 crx si e brake cables, 93 integra stainless steel brake lines, dot 5 brake fluid, 90-91 crx si brake master and prop, ES poly bushings, crx si stock sway bar for now...

 

91' hatchback standard dx
89' LS rear brakes
89' brake cable

 

'88 civic si hatch
'90 crx si rear discs
'91 integra brake cables
Skunk2 rear camber kit and lower control arms

 

As helpful as this might be, isn't this already covered in the FAQ?

Anyways...
My car, 1991 Civic STD Hatchback
90-93 Integra trailing arms with disc and calipers, soft lines, and E-brake cables.
Reused my stock upper/lower control arms and toe arm as stated in the FAQ.

 

It is covered in the FAQ. People just need not be lazy and help themselves.