I am was wondering if anyone had a link to a truly complete write up on a diy clutch replacement. Im gonna buy the parts, the haynes or helms manual, whichever one ir more efficient, and my girlfriends dad who says he can more than direct me on how to do this! He has done them before and im fairly mechanically inclined, and trust the man....so a quality diy wuld be nice for a starting point to read to embark on this endeavor! Thanks a bunch!

 

here ya go. For a dc5 but good write up

http://customdc5.my-php.net/diy/clutch/

 

Nice write-up, lots of tips, tricks, & torques; I would add resurface or replace flywheel, though. At least scuff it up...

 

i would replace the flywheel u are right there...

 

depends on the mods and application. But I swapped mine out at the same time cause yeah, your right there

 

Hehe. Been there; done that.

 

AIRTOOLS Helps ALOT!

clubrsx has a good writeup. what i did mine off of..

http://forums.clubrsx.com/showthread.php?t=538537

All i gotta say is the subframe was the longest / worse part to take out! lol.