SPWD part out: AEM/FUll-Race/MSD/T1
Thread Starter
Honda-Tech Member
Joined: May 2005
Posts: 666
Likes: 0
From: Glen Burnie
SPWD part out: AEM/FUll-Race/MSD/Magnafuel
Starting to part out my SPWD set-up.
Buyer Pays Shipping and add 3% for paypal fees.
MSD Digital 6 Plus $125
MSD Blaster HVC-2 Coil $100
4 Inch Aluminum Downpipe For Full-race top mount $150
Custom Intercooler/BBK 70mm Throttle Body/3" Charge Pipe with Tial 50mm BOV(polished) All Charge Piping V-Banded Together/other charge pipe for GT42r Turbo and Manifold Above. Was in EG With Full-Race Intake Manifold
$1050(perfer pickup but will ship. buyer pays shiping)
Mahle Pistons 81.5mm $425
Avid B-series Mounts(eg/dc)(all 5 mounts)(other 1 is still on the trans) $250
Inlinepro T4 Turbo Kit $2600
Manifold, turbosmart wastegate, gt4088, 3inch downpipe, intercooler piping, inlinepro bov, gm 3 bar map sensor, gm boost control solenoid, oil feed and return line precision 750 intercooler
ERL Sleeved GSR Block with ERL 5 Main Girlde 85mm(good for allmotor)(no crank $1000
Buyer Pays Shipping and add 3% for paypal fees.
MSD Digital 6 Plus $125
MSD Blaster HVC-2 Coil $100
4 Inch Aluminum Downpipe For Full-race top mount $150
Custom Intercooler/BBK 70mm Throttle Body/3" Charge Pipe with Tial 50mm BOV(polished) All Charge Piping V-Banded Together/other charge pipe for GT42r Turbo and Manifold Above. Was in EG With Full-Race Intake Manifold
$1050(perfer pickup but will ship. buyer pays shiping)
Mahle Pistons 81.5mm $425
Avid B-series Mounts(eg/dc)(all 5 mounts)(other 1 is still on the trans) $250
Inlinepro T4 Turbo Kit $2600
Manifold, turbosmart wastegate, gt4088, 3inch downpipe, intercooler piping, inlinepro bov, gm 3 bar map sensor, gm boost control solenoid, oil feed and return line precision 750 intercooler
ERL Sleeved GSR Block with ERL 5 Main Girlde 85mm(good for allmotor)(no crank $1000
Last edited by GT40eg; Mar 1, 2009 at 01:28 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2005
Posts: 666
Likes: 0
From: Glen Burnie
Re: SPWD part out: AEM/FUll-Race/MSD/T1
i didnt do it. i got it from somebody like that because of the intercooler that was made for the car. if wanted i can get that elbow cut off and a new 44mm flange welded on.
