Well I was building for this season, but have decided to move on to better things, so selling my long block.
The motor was built by MB Racing, all parts are brand new, the motor was built and properly put away so it has 0 Miles.

*Stock JDM B18C Long Block $1000

*Machine work to block=
Golden Eagle Sleeves
O-ringed
Bore (83mm) & hone
Decked
Line Bore
Crank service = Micro polish & high speed balance
= $1600

*Arias 83mm Turbo Pistons $500
*Manley Turbo Tuff Rods $725
*ACL Race Bearings $120
*OEM Type R Oil Pump $110
*OEM Type R Water Pump $100
*Gates Timing Belt $89
*Golden Eagle Headstuds $120
*Cometic Head Gasket
*Moroso Oil pan (Kicked-out sump that increases oil capacity to 5.5 quarts) $260
*OEM Oil Pan Gasket $30
*Golden Eagle Oil Squirter plugs $20
*Valve Cover Gasket $25
*Labor $500

*Valve Seals $30
*Supertech Dish Valves $240
*Supertech Valve Springs & Retainers $320
*Bronze Valve Guides $100
*JDM Type R Cams $300
*HKS Cam Gears $180
*Machine Shop Service (3 Angle Valve Job, Resurface & Assembly) $380

Total Price = $6859


Price is set @ $6000 NEG, since all parts are new and have not been used, and only SLIGHTY NEG.

Please feel free to PM me or call me at 347-525-6585 Manny, if you have any questions or are interested in the motor. If I do not answer please leave a message and I will call you back asap. Also buyer will be given receipts for everything.

FOR SALE ONLY! NO TRADES!

Pick up preferred, but shipping can be arranged, buyer will be responsible for any and all shipping charges.


Pics added 3/15/09...

 

bump!

 

If you want any serious buyers you will have to cut your price in half because you are trying to get basically what you payed for. Not going to happen my friend

 

GREAT SET UP..

could put up some power

 

 

Just for your information, this is not the first time I sell an item. I am a member on MANY different forums not only Honda. I have also been doing business for a long time when it comes to selling aftermarket parts, so I know how things go.
So the price I have posted is a starting point to open a neg with a serious buyer. This thread was made to sell an item, not to have people that are not interested, state there opinion on my asking price or the item I am selling. So if you are interested please PM me and we'll talk if not then please dont bother to post further.

Also just to clear something, why would I sell for half the price if all the parts are brand new and have never been used?
Think of it this way, first of someone would may buy this is saving there self some money and down time. So No I will not go too much lower then my asking price.

 

bump!

 

bumP!

 

Will you sell the short block??

 

He stole my question pm me :D

 

Pm me first. lol

 

^^^
I'm open to just sell the short block, but only if the offer is right. Just add up all the cost I have into the short block and make a reasonable offer and I wouldn't mind selling it separate.

 

bump!

 

yep i just sold a semi built motor for $2,000, $6,000!you got to lower that for some buyers.
http://www.hondamarketplace.com/show...912&highlight=

 

Good luck on the sale

 

Found this interesting

"your not gonna get anything near what your asking just like all the other built long blocks here your gonna have to cut your price in half!http://www.hondamarketplace.com/show...121&highlight=
i just sold the same setup only in n.a form for $2,000!. and i spent just about what you did!
http://www.hondamarketplace.com/show...912&highlight="

 

Umm.... that just goes to show you that I can deff get somewhere near what I am asking. Reason I say that is... your block is basically stock. Some of the items you put into your motor cost a lot less then what I spent. Example....

JDM b16a block never decked stock bore/ honed { I paid $1800 just to machine the block}
p30 pistons-10:65 comp { I paid about $200 more then what you probably paid for yours}
shot peaned rods { I paid $725 for my rods }

So just in 3 parts I spent about $2500 more then what you have into your motor so the price I am selling for isn't exaggerated. Also as I posted, I spent $6800, I am asking for $6000 but is also NEG.

 

dang that is a high price....i sold my fuilly built motor with turbo in my 2000 civic si for only $6800
b18c1
golden eagle sleeves
crower rods ,mahle pistons, acl race bearings, bore honed, supertech valvetrain, JG manifold, cometic HG, arp headstuds, aem gears, turbokit t3/t67 garrett topmount
i spent over $13k on the car and only expected that much back

im not hating, just letting u know ur price is too high

 

gl with the sale its a nice setup bump for you, i hope you do get close to what you paid for.

 

Not hating??? So why find the need to post in this thread, knowing you are not even interested in buying the motor????? No where in my thread I asked anyone if price was too high or what you sold your setup for. I know what I spent and I know what price I want for it. I am not feening for money so I will not sell for a crackhead price.



Thank you.

 

bump!

 

BUMP! Pics added

 

bump!

 

Why does it look like the "5" In B18C5 has been Shaved off ?
I'm Not saying you did in anyway just looks like that to me for some reason I can kinda see a shadow of a 5

 

Don't know where you see that but the motor is a Legit B18C, no modifying ever done to the #'s on this motor.