FS: B-Series parts/Turbo parts!
FS: B-Series parts/Turbo parts!
Like the title says, I have too much Honda stuff and I need it gone.
1 B16 crank (Good as far as I know and used) - $60
1 Greddy Type-RS BOV with pipe (Used but still in good condition) - $150 OBO
3 Sets of B-Series cams (2 sets of stock B16 cams and are in great condition if not mint, and a pair of GSR cams still in good condition) - $40(B16) and $60(GSR) OBO
A **** ton of B-Series cam gears (Stock) - $10 each or $15 for a pair
1 B16 Intake manifold (used with no sensors) - $70 OBO
DSM 440cc injectors (Still good) - $60 OBO (No resistor box)
A set of (4) Stock B16 pistons and rods (All pistons are bad, but rods are still good) - $40 OBO
1 Ebay Tial knockoff 38mm wastegate with an 8psi spring with all the fittings and no fire ring (used and works fine) - $30
1 (Used) Cast iron turbo manifold for a T3 frame turbo and a 38mm wastegate that bolts up to any B-Series head - $50
2 B-Series (Don't know which ones) oil pickups - $20 OBO
1 Set of B-Series (Used and cleaned) rocker arms - $75
3 (Used) [Eagle?] Rods (5290H.O) for a B16 - $80
3 (Used) SRP Pistons for a B16 (9:1 or 9.5:1 compression, 81.5mm or 20 over, and they come with wristpins but no locks) - $85
1 Ebay (SportJDM or whatever the hell you want to call it) T3/TO4E .57 Trim turbo (Has worn seals but has no shaft play) - $100
3 B-Series water inlets - $20 ea.
A couple factory B-Series oil coolers - $30 ea.
3 B-Series oil pans (Not tapped and no drain plug) [I will clean them up as in wash them in a solvent tank] - $25 ea.
A set of cam covers that came off a B18C5 - $60 OBO?
1 B16 bare block (stock bore with great looking sleeves, no crank, no maincaps) - $50
*All prices are negotiable, just don't lowball me (Please).
I'll also take trades too! I need a GSR head (With the whole valvetrain, and must be usable, like no bent or burned valves) and I'll offer some cash on my end + trade.
Either E-mail me (Jasony0630@hotmail.com) or shoot me a text at (505)-920-0015 (Jason).
Thanks for looking.
All of this is in Albuquerque, NM and ready to ship (Small stuff atleast.)
1 B16 crank (Good as far as I know and used) - $60
1 Greddy Type-RS BOV with pipe (Used but still in good condition) - $150 OBO
3 Sets of B-Series cams (2 sets of stock B16 cams and are in great condition if not mint, and a pair of GSR cams still in good condition) - $40(B16) and $60(GSR) OBO
A **** ton of B-Series cam gears (Stock) - $10 each or $15 for a pair
1 B16 Intake manifold (used with no sensors) - $70 OBO
DSM 440cc injectors (Still good) - $60 OBO (No resistor box)
A set of (4) Stock B16 pistons and rods (All pistons are bad, but rods are still good) - $40 OBO
1 Ebay Tial knockoff 38mm wastegate with an 8psi spring with all the fittings and no fire ring (used and works fine) - $30
1 (Used) Cast iron turbo manifold for a T3 frame turbo and a 38mm wastegate that bolts up to any B-Series head - $50
2 B-Series (Don't know which ones) oil pickups - $20 OBO
1 Set of B-Series (Used and cleaned) rocker arms - $75
3 (Used) [Eagle?] Rods (5290H.O) for a B16 - $80
3 (Used) SRP Pistons for a B16 (9:1 or 9.5:1 compression, 81.5mm or 20 over, and they come with wristpins but no locks) - $85
1 Ebay (SportJDM or whatever the hell you want to call it) T3/TO4E .57 Trim turbo (Has worn seals but has no shaft play) - $100
3 B-Series water inlets - $20 ea.
A couple factory B-Series oil coolers - $30 ea.
3 B-Series oil pans (Not tapped and no drain plug) [I will clean them up as in wash them in a solvent tank] - $25 ea.
A set of cam covers that came off a B18C5 - $60 OBO?
1 B16 bare block (stock bore with great looking sleeves, no crank, no maincaps) - $50
*All prices are negotiable, just don't lowball me (Please).
I'll also take trades too! I need a GSR head (With the whole valvetrain, and must be usable, like no bent or burned valves) and I'll offer some cash on my end + trade.
Either E-mail me (Jasony0630@hotmail.com) or shoot me a text at (505)-920-0015 (Jason).
Thanks for looking.
All of this is in Albuquerque, NM and ready to ship (Small stuff atleast.)
Re: FS: B-Series parts/Turbo parts!
How did that mani work? i got one like it ,i think..from Ilovetaco on ebay. mine has wastegate right in center, looks like it will work well.
Thread
Thread Starter
Forum
Replies
Last Post
