99 Civic Si EBP K20 swap 13,500
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 35
Likes: 0
From: Richmond, VA, United states
99 Civic Si EBP K20 swap 13,500
Contact info: 1-804-467-2296 ccrtech17@gmail.com
Asking price: 13,000 OBO
CLEAN TITLE
car is located in RICHMOND
I am selling my 1999 civic si that I have spent so many hours building with my own bare hands. I have to sell to dig myself out of debt so I must let this car go, reluctantly. Every last thing on this car was installed by me with the exception of the 3” exhaust and alignments/tire mount/balance. I have never run this car at the track and I am not going to speculate on what it would run, the car made 231/167 at abbicus racings dyno in Virginia Beach. This car drives and rides absolutely incredible, I have put about 15K on the car since the k swap and it never ceases to make me smile every time I step foot in it.
The motor is the k20A2 out of a 2002 rsx-s the motor had 27K on it when I got it so now it has roughly 39K . The transmission is a 2005 rsx-s 6 speed transmission, I has to drill out for the speed sensor in the back of the transmission(everything works perfect) this transmission has a new 2nd and 3rd gear in it(only have 1K on the new gears). The engine and transmission have both been painted at a body shop. The engine bay was painted by a professional painter while the motor was out(I will include picture). Every suspension parts on the car has been removed and painted(black) and clear coated, the Tein coilovers are painted EBP along with the hood dampers. Every bolt under the hood has been polished and clear coated, the brakelines have all been polished and clear coated. The engine harness is nylon wrapped and the body harness is completely tucked, the brake booster and clutch line run inside the fender. Fuel lines, 6AN supply from tank to motor, 8AN return from motor to tank with a fuel lab filter mounted next to the gas tank. Always used mobile 1 5-20 with a hamp filter, oil was changed every 2k. I am very **** and I keep this car garage kept and I treat it like an infant, it is EXTREMLY well maintained, here is a list of the parts.
-type r camshafts
-skunk 2 dual valve spring/tit. Retainers
-skunk 2 adjustable cam gear(exhaust)
-ARP head studs
-RBC manifols
-karcepts BDL throttle body adapter
-BDL 70mm throttle body
-Karcepts cold air intake(for k series)
-R-Crew header
-Custom 3” exhaust
-vibrant muffler(3”)
-Brand new type r valve cover
-Brand new type r dipstick
-Hondata intake manifold gasket
-Kaiten 6lb flywheel
-06 civic si LSD diff
-Competition clutch (stage 1)
-Hasport EKK1 mounts
-Hybrid racing adapter harness
-Hondata K-Pro
-DDS level 2.9 axles
-Tein SS coilovers
-Skunk 2 pro series front camber kit
-omni rca’s
-adjustable rear sway bar links(king motorsports)
-Full race K traction bars
-brembo rotors with Honda pads(all 4)
-Russel stainless steel brake lines(all 4)
-ARP extended studs(all 4)
-Buddy club bronze lug nuts(all 4)
-Falken Azenis rt-615( 40% tread)
-Karcepts shifter kit
-Buddy club short shifter
-solid shifter bushings
-Brand new OEM floor mats
-100% custom headlights by customlightz.com
-OEM antenna delete kit
-35% tint front windows 20% in back
-password fog lights
-password fender washers
-pioneer deck(I don’t know what kind but its like 1y old)
-JBL component speakers in front
-Apline component speakers in back
-400Wx4 amp for the highs(monster rca’s)
-10 guage wire runs from deck to all speakers and amp
I may have left a thing or two out but if I remember something I will add it right away. If you have ANY questions please feel free to ask, you can email me at ccrtech17@gmail.com my asking price is $13,500 I clearly have MUCH more involved if you cant meet this price then let me know, I can remove parts in order to drive price down. NO TRADES
Asking price: 13,000 OBO
CLEAN TITLE
car is located in RICHMOND
I am selling my 1999 civic si that I have spent so many hours building with my own bare hands. I have to sell to dig myself out of debt so I must let this car go, reluctantly. Every last thing on this car was installed by me with the exception of the 3” exhaust and alignments/tire mount/balance. I have never run this car at the track and I am not going to speculate on what it would run, the car made 231/167 at abbicus racings dyno in Virginia Beach. This car drives and rides absolutely incredible, I have put about 15K on the car since the k swap and it never ceases to make me smile every time I step foot in it.
The motor is the k20A2 out of a 2002 rsx-s the motor had 27K on it when I got it so now it has roughly 39K . The transmission is a 2005 rsx-s 6 speed transmission, I has to drill out for the speed sensor in the back of the transmission(everything works perfect) this transmission has a new 2nd and 3rd gear in it(only have 1K on the new gears). The engine and transmission have both been painted at a body shop. The engine bay was painted by a professional painter while the motor was out(I will include picture). Every suspension parts on the car has been removed and painted(black) and clear coated, the Tein coilovers are painted EBP along with the hood dampers. Every bolt under the hood has been polished and clear coated, the brakelines have all been polished and clear coated. The engine harness is nylon wrapped and the body harness is completely tucked, the brake booster and clutch line run inside the fender. Fuel lines, 6AN supply from tank to motor, 8AN return from motor to tank with a fuel lab filter mounted next to the gas tank. Always used mobile 1 5-20 with a hamp filter, oil was changed every 2k. I am very **** and I keep this car garage kept and I treat it like an infant, it is EXTREMLY well maintained, here is a list of the parts.
-type r camshafts
-skunk 2 dual valve spring/tit. Retainers
-skunk 2 adjustable cam gear(exhaust)
-ARP head studs
-RBC manifols
-karcepts BDL throttle body adapter
-BDL 70mm throttle body
-Karcepts cold air intake(for k series)
-R-Crew header
-Custom 3” exhaust
-vibrant muffler(3”)
-Brand new type r valve cover
-Brand new type r dipstick
-Hondata intake manifold gasket
-Kaiten 6lb flywheel
-06 civic si LSD diff
-Competition clutch (stage 1)
-Hasport EKK1 mounts
-Hybrid racing adapter harness
-Hondata K-Pro
-DDS level 2.9 axles
-Tein SS coilovers
-Skunk 2 pro series front camber kit
-omni rca’s
-adjustable rear sway bar links(king motorsports)
-Full race K traction bars
-brembo rotors with Honda pads(all 4)
-Russel stainless steel brake lines(all 4)
-ARP extended studs(all 4)
-Buddy club bronze lug nuts(all 4)
-Falken Azenis rt-615( 40% tread)
-Karcepts shifter kit
-Buddy club short shifter
-solid shifter bushings
-Brand new OEM floor mats
-100% custom headlights by customlightz.com
-OEM antenna delete kit
-35% tint front windows 20% in back
-password fog lights
-password fender washers
-pioneer deck(I don’t know what kind but its like 1y old)
-JBL component speakers in front
-Apline component speakers in back
-400Wx4 amp for the highs(monster rca’s)
-10 guage wire runs from deck to all speakers and amp
I may have left a thing or two out but if I remember something I will add it right away. If you have ANY questions please feel free to ask, you can email me at ccrtech17@gmail.com my asking price is $13,500 I clearly have MUCH more involved if you cant meet this price then let me know, I can remove parts in order to drive price down. NO TRADES
Last edited by EM1Hybrid; Feb 16, 2009 at 07:38 PM. Reason: price drop
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
dohc-father
Vehicles for sale
8
Apr 13, 2007 04:46 AM
