90 CRX Si w/B16 Swap- Tons of extras!!
Up for sale is a 90 CRX Si. It has an obd1 converted b16 swap with a non-LSD cable transmission. The timing belt and water pump was done about 20k miles ago. The clutch was replaced about 15k miles ago with a daikin oem replacement model. It has an oem flywheel. It doesnt smoke, grind, popout, leak, overheat, or anything of that sort. It has a recent paint job from about a year and a half ago. Its shiny, like a bowling ball. The front bumper,hood, and lip are all new oem parts that are not yet painted (even though you dont paint crx lips). The interior is fully complete and the drivers side seat has the standard wear on the bolster. The interior comes complete with a good sound system and a custom mounted amp/sub combo that fits around the kirk racing 4 point roll bar. Included in the sale are the rest of the weld-up tubing to make complete the kirk kit into a 6 point. It comes with a set of Konig Helium wheels on fresh falken ziex 912's in a 205/50/15. Under the hood there is a full wire tuck as well.
Here are some pics.











Cliff's Notes
Engine+Trans
B16 Swap- obd1 converted
Non-LSD cable trans with recent clutch job
Aem short ram intake
JDM 4-1 ITR header
Chipped p28
Hasport mounts and linkage
Full engine bay wire tuck
RSR Exmag Exhaust
Interior
Momo hub and steering wheel
Full stereo with custom amp and sub
Kirk racing 4point rollbar with additional weld on tubing for 6point
GSR cluster- fully functional
All panels and interior intact
Exterior and suspension
Ground control coilovers on tokico Illumina's
Paint job about 1.5 years ago
New oem hood, front bumper and lip
Konig Heliums w/ fresh 205/50/15 Falken Ziex 912's
Heater/ac control is still in one piece!
Asking $4,000 obo
Email is the best way to reach me.
ProFunctionAuto@gmail.com
Here are some pics.











Cliff's Notes
Engine+Trans
B16 Swap- obd1 converted
Non-LSD cable trans with recent clutch job
Aem short ram intake
JDM 4-1 ITR header
Chipped p28
Hasport mounts and linkage
Full engine bay wire tuck
RSR Exmag Exhaust
Interior
Momo hub and steering wheel
Full stereo with custom amp and sub
Kirk racing 4point rollbar with additional weld on tubing for 6point
GSR cluster- fully functional
All panels and interior intact
Exterior and suspension
Ground control coilovers on tokico Illumina's
Paint job about 1.5 years ago
New oem hood, front bumper and lip
Konig Heliums w/ fresh 205/50/15 Falken Ziex 912's
Heater/ac control is still in one piece!
Asking $4,000 obo
Email is the best way to reach me.
ProFunctionAuto@gmail.com
i almost traded for this car but ended up with a ticket instead... is the rust fixed on it and what happen to the itr motor that was in it, is that still for sale. any problems with steering rack, and or tierod ends? thank you
The body is untouched from when i got the car
The JDM ITR motor is possibly for sale, but is not a main priority at the moment.
Steering rack, inner tie rods, and outer tie rods are freshly redone.
Vins are all intact.
Thanks
sweet i didnt know if the itr was for sale ...



for clean rex
for retagged dc integra's with jdm fronts