i wana delete the stock banjo fitting on the stock rail and run an fittings off the side of the rail but i dont know what size or pitch the threads are on the side of the rail where the banjo fitting is connected to.

 

Any reason you want to stay with the OEM fuel rail? Might be easier to go with an aftermarket fuel rail if you want to use AN fittings.

 

because thats what i have, iv seen people use an fittings on stock rails.

 

Not sure on the thread and pitch size, but Russel makes a Honda/Acura specific banjo to AN fitting.

http://store.summitracing.com/partde...5&autoview=sku

 

Thanks man