1994 Integra GSR - Built All-Motor CLEAN
757-621-8641 Call or text
I have a 1994 Integra GSR in great shape for its year. When i bought the car it needed some work, so I rebuilt the motor and the trans. Motor has less then 4k since the rebuild. Car is a great, fun daily driver. It has AC, PS and CRUISE CONTROL! Car made 190hp and was tuned by Shad at Accuracy. Car will come with a VIS carbon fiber hood. All machine work was done by Abacus Racing.
BLOCK
-Gsr block
-Nippon Racing .25 over B16 pistons
-ACL race bearings
-ARP rod bolts
-New OEM water pump
-New OEM oil pump
-New OEM rear main seal
-New OEM timing belt
-New OEM tensioner
-New OEM oil pan gasket
-New Cometic head gasket
-Bored, honed and decked by Abacus
HEAD
-Gsr head
-Inline Pro valve springs and retainers
-Skunk2 intake manifold
-Skunk2 70mm throttle body
-Skunk2 stage 2 cams
-DTR header (I paid 800 bucks for this header)
-All new bronze valve guides and seals
-Supertech flat faced valves
-New OEM cam seals
-3 angle valve job and milled by Abacus
TRANSMISSION
-Less than 30k on it
-Exedy stage 1 clutch
-New OEM axle seals
OTHER
-New OEM rear brake pads and rotors
-Lowered on Ground Control coil overs
-Pioneer speakers all around
-Brand new Falken tires
-Energy suspension red motor mount inserts
-Custom intake
-New Inspection
Asking $5200 but taking offers, NO LOW ***** PLEASE OR TRADES



I have a 1994 Integra GSR in great shape for its year. When i bought the car it needed some work, so I rebuilt the motor and the trans. Motor has less then 4k since the rebuild. Car is a great, fun daily driver. It has AC, PS and CRUISE CONTROL! Car made 190hp and was tuned by Shad at Accuracy. Car will come with a VIS carbon fiber hood. All machine work was done by Abacus Racing.
BLOCK
-Gsr block
-Nippon Racing .25 over B16 pistons
-ACL race bearings
-ARP rod bolts
-New OEM water pump
-New OEM oil pump
-New OEM rear main seal
-New OEM timing belt
-New OEM tensioner
-New OEM oil pan gasket
-New Cometic head gasket
-Bored, honed and decked by Abacus
HEAD
-Gsr head
-Inline Pro valve springs and retainers
-Skunk2 intake manifold
-Skunk2 70mm throttle body
-Skunk2 stage 2 cams
-DTR header (I paid 800 bucks for this header)
-All new bronze valve guides and seals
-Supertech flat faced valves
-New OEM cam seals
-3 angle valve job and milled by Abacus
TRANSMISSION
-Less than 30k on it
-Exedy stage 1 clutch
-New OEM axle seals
OTHER
-New OEM rear brake pads and rotors
-Lowered on Ground Control coil overs
-Pioneer speakers all around
-Brand new Falken tires
-Energy suspension red motor mount inserts
-Custom intake
-New Inspection
Asking $5200 but taking offers, NO LOW ***** PLEASE OR TRADES



Trending Topics
Car has been bought and I love it! Thank you Shawn...lovin' it so far. I'm sure I'll hit you up with a question or two about it along the way, hope you don't mind. The drive home was fun (except for my wife losing me...not my fault...I swear).
You did a real nice job on the detail work man, thank you! The paint is smooth as can be and the interior is mint. Just my two cents on your interior detailing...for the love of God...don't Armor All the wheel and shift **** on future cars! Steering a car with a slippery steering wheel and not PS is not fun
Seriously, it looks great though.
Seriously, it looks great though.
Thread
Thread Starter
Forum
Replies
Last Post
DC2Mex
Classifieds: Forced Induction
2
Nov 24, 2015 03:01 PM
r1de23
Vehicles for sale
3
Jul 15, 2009 06:30 PM



*I sent this to him at work today and it looks like he's leaning heavily towards it* 

