A few "high dollar" tools for sale. CHEAP!
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 14
Likes: 0
From: Stockton
A few "high dollar" tools for sale. CHEAP!
I have a few tools I want to clear out. I got a new tool box and tools and sorted all my tools out and built a workshop in my garage. I came up with some doubles.
THESE ARE NOT HARBOR FREIGHT TOOLS!! all prices are shipped to the lower 48 states only.
I have a NEW IN CASE Armstrong *micrometer*(very accurate) 1/2" drive Torque wrench #64-084, THIS IS A ~$250 wrench!! the cheapest I have found on the NET is $200 at costplustools.com.. Sears sells it for $350!! comes with all instructions etc.. Never used. $100 shipped OBO. < You will not find one cheaper..
I also have another EXACT same one as above USED 1 time!! (really it was new but I just used it lol) $60 shipped
SPECS FOR WRENCHES:
10-100FT lbs..
Accuracy of +/-3% clockwise (20-100% of full range)
• Provides precise torque application (Counterclockwise calibration available on special order.)
Head design specifically for torque wrenches
• Enclosed head
- seals out dirt and contaminants
• Torque wrap design
- reduces stress on gear teeth and pawls for longer life
• 10 degree ratcheting angle
- permits use in confined areas
Operating / design capabilities
• Innovative linear ball bearing mechanism
- Assures superior accuracy and repeatability by eliminating friction between the spring and case
- Eliminates speed sensibility errors
- Produces a crisp, audible click over the entire torque range
• Rubber seal between ratchet head and tube
- Keeps lubrication in and dirt out
• Detent style locking collar
- Allows for ease in setting desired torque
- Prevents the accidental change of settings
• Handles are lightly knurled and grooved
- Provides comfortable, non-slide grip
I also have a Ingersoll Rand Titanium 2135TI Impact wrench/gun. It is used but only 4-5 times when my Dayton could not do the job. THIS IS 1000FT pounds of TQ!! Nothing will hold this back.VERY well Kept and LOOKS GREAT! New was $300. here is a link to the specs and a reference picture to it. Mine is that same one. I am asking $100 shipped!!!
http://www.shop.com/Ingersoll_Rand_IR_2 ... 9-p!.shtml
I have verified paypal and have MANY good vouches on RPR as well as 100% EBAY feedback. Plus most the 209(stockton) guys know me.NEVER a negative vouch anywhere.
THESE ARE NOT HARBOR FREIGHT TOOLS!! all prices are shipped to the lower 48 states only.
I have a NEW IN CASE Armstrong *micrometer*(very accurate) 1/2" drive Torque wrench #64-084, THIS IS A ~$250 wrench!! the cheapest I have found on the NET is $200 at costplustools.com.. Sears sells it for $350!! comes with all instructions etc.. Never used. $100 shipped OBO. < You will not find one cheaper..
I also have another EXACT same one as above USED 1 time!! (really it was new but I just used it lol) $60 shipped
SPECS FOR WRENCHES:
10-100FT lbs..
Accuracy of +/-3% clockwise (20-100% of full range)
• Provides precise torque application (Counterclockwise calibration available on special order.)
Head design specifically for torque wrenches
• Enclosed head
- seals out dirt and contaminants
• Torque wrap design
- reduces stress on gear teeth and pawls for longer life
• 10 degree ratcheting angle
- permits use in confined areas
Operating / design capabilities
• Innovative linear ball bearing mechanism
- Assures superior accuracy and repeatability by eliminating friction between the spring and case
- Eliminates speed sensibility errors
- Produces a crisp, audible click over the entire torque range
• Rubber seal between ratchet head and tube
- Keeps lubrication in and dirt out
• Detent style locking collar
- Allows for ease in setting desired torque
- Prevents the accidental change of settings
• Handles are lightly knurled and grooved
- Provides comfortable, non-slide grip
I also have a Ingersoll Rand Titanium 2135TI Impact wrench/gun. It is used but only 4-5 times when my Dayton could not do the job. THIS IS 1000FT pounds of TQ!! Nothing will hold this back.VERY well Kept and LOOKS GREAT! New was $300. here is a link to the specs and a reference picture to it. Mine is that same one. I am asking $100 shipped!!!
http://www.shop.com/Ingersoll_Rand_IR_2 ... 9-p!.shtml
I have verified paypal and have MANY good vouches on RPR as well as 100% EBAY feedback. Plus most the 209(stockton) guys know me.NEVER a negative vouch anywhere.
Thread
Thread Starter
Forum
Replies
Last Post